wanareef

You might have to do this or this to get this Sometimes if you just stuff a air line down the middle and keep going until it stops is another way to silence it somewhat What you did by adding all those extra pcs changed the orginal design you want to keep it simple.

It's not hard to load them up. Get a photobucket acct,load them up and then click on the one you want to load, you will have 1/4 choices on the right, click on "img" and then just paste URL=http:// s48.photobucket com/user/wanareef/ media/ Clipboard02.jpg.html This url becomes this pic below

Do a big WC, then test again in a couple of days. Helps to mark off on a calendar - my memory is not the same as it use to be

Must be the welding fumes getting to you. Reactor - diy one at that

Left a msg

You don't need anything special just a drill and the right size bit, just go slow. I would not put a float switch that low and drill thru, just in case of leaks (especially if there's a hole under the water line). They make optical sensors you could try. Float switches wires are not to be submerged anyway.

Used,working great, comes as pictured, use std controller or use the Apex cable (see pix) $45

Answered your PM Depending on your bracing you might not be able to get 72" of overflow into the tank (probably more like 70"-71" with inside measurement) and it'll be 60" or even 48" that you can snake in past the bracing. You would be better to install an internal overflow for surface skimming rather than an external one, or add something like the "ghost" type overflow, diy 2 boxes but all your really need is one.

Your box is full,still available?

Yes EB8 ,didn't need it then.

Looking for a MB8, new, near new still working LMK what you have

Sry about the dirty glass, this one is about the size of a Susan "B" north portland

Y G Mail

Kool, I won't even hold out for designer clowns

Jon, got your hands full now- there's lots of room down there in your basement for "Chewie's Clown Shop"

I like this approach better, hate to ruin a hole saw with a torch

Just stay with the flow thru, easier. The other way you would have to split your overflow to two different corners then return in the middle, I have built both but the flow thru is the simplest and for the baffle after the fuge you can put teeth in it to hold back the macro K.I.S.S.

Thanks for that, I'll try it. Had some sponge growing on the main float and didn't catch it. Had a 50gal flood, again, with the ATO pumping in fresh water.

Fallback OFF Set OFF If Sw1 CLOSED Then ON If Sw2 OPEN Then OFF Defer 002:00 Then ON Min Time 010:00 Then OFF this is my current prog on my Apex, sw1 is a std float switch, sw2 the float is turned upside down For you program guru's I want to add a line to turn it off "Period" after 10 mins of running because this line is not working "Min Time 010:00 Then OFF" TIA

Those millis look really nice and # 67

WTB/TT for 1 1/4" UniSeal will need 2 LMK

DIY Couple of these skimmers or one bigger one

(2) 1 pound BRS gfo packages. One unused, the other 90% full. $20 for both. (1) 4.5 pound package of BRS kalkwasser. Unused. Free with purchase. (1) 3.65L marineland activated carbon. About 40% left. Free with putchase. Package deal of random food products. (1) garlic power 50% left. (1) cyclopeeze 75% left. (1) selcon unused. (1) coral frenzy. All for $10. Take paypal?

If Woodie is still around, he has some , gl

Are these for the Hanna colorimeter?