Kshack

I will take the miyagi tort. Interested in trade? Ken

I contacted him to see how much we would have to order to get a break on shipping. He never got back to me. Dr Fosters only charges $8 to ship and I think you can order several containers at that cost. The charge for Gettanked was around $35 just for the shipping. Do you know of any group order details?

You will not get good macro shots with those lenses. You would need and additional macro lens that would cost $400-1000.

PM Sent. Ken

Yes, I have one with a new, unused, impeller. $80.

I would try some. How is it different form Rod's food?

I know the area...spent most of my life close to there. I would be willing to drive down to get the saw when needed....would you come pick it up when you want it? I am 5 minutes off I-5, exit #14. Ken

jackaninny, I might be interested in going in with you for one. I am in Ridgefield, just North of Vancouver. Where in Portland are you located? Ken

I have a Mag18 with NIB impeller. $80. Ken

Very interested in seing how long a charge lasts. I have read reviews that say the costs will be very high due to a lasting only about 2 weeks. The 5 gal bulk may be the answer! Let us know after a few changes your estimated yearly costs. Ken

Ryan, That is close to my tank size...68X36X25, so if you want to check it out you are welcome. It is a peninsula (glass). Might get some ideas, might see some things you would want to avoid. Tank is in Ridgefield, WA. Ken

DR., I noticed this..."I am using GFO/carbon with intermittant bacteria".. and had some thoughts.... might be wrong. Bacteria need a source for C, N, and P. We dose C (vodka, suger, etc) because the bacteria are carbon limited and will not reduce N and P if not allowed to grow. If you use GFO, will you not be P limited and thus the bacteria will not grow, and thus N will remain high? I am sure someone out there knows the exact ratios of C-N-P, but if P is low and N is high, how can adding C work? Steve...any thoughts? Ken

I got the Nikon D40 after reading these reviews: http://www.kenrockwell.com/nikon/d40.htm My only regret is the camera can not do in tank white balance (I use 20K Radium). It will not read when trying to do custom wb.

Hey Frank, Check this out. If you can talk him into selling you one you could rent it out to other members to recoup your cost (or trade for frags). http://www.reefcentral.com/forums/showthread.php?t=1808040

I do not shake the vial, but swirl it for 30seconds, then let it do the 3 minute read. Should I swirl longer? The TDS "0" is from both an inline meter and a handheld meter. I do wipe with a lint free cloth, but there are some minor scratches that were there when the unit was new.

I have been trying to get my PO4 levels down from .06-.05 to the recommended .03 levels for some time now. I purchased a Hannah meter 9 months ago. Yesterday I decided to try testing my RO water. Made sure my sample was 0 TDS (new DI and let it run for a few minutes). Took three samples and the average was around .10. Thought my meter was defective and was thinking of sending it back. Took a sample direct from faucet and the number was .64. Then took a sample from my tank and it was .04. So my meter looks like it is working properly, but I am confused about my RO water being so high. Couple observations....With the fresh water tests, I noticed a very fine film of bubbles on the inside of the glass vial. Could that be the cause for the high numbers? Does this test not work well for fresh water? Is it possible for a PO4 of 0.10 in TDS "0" water? I tried to clean the inside of the glass vial. Used rubbing alcohol in one and vinegar and rubbing alcohol in the other. Could this be the cause of the very fine bubbles and strange numbers? Anyone know this meter well enough to guess what is going on?

I used a Reeflow Barracuda for my basement sump. Sump was on a stand, so I only had to go up 12 feet. I had to throttle down the pump because it was too much flow full on. Try to use spaflex if possible...can make a gentle bend which cuts down on loss. Need 11/2 or 2" for the pump.

Sold on CL.

Goes to the store Friday (Pellet Grill Outlet). They are going to sell it for $450...just saying.

My Nikon D40 will not register the custom white balance. It does not see the Radium 20K for some reason. Tried the white lid from salt container. Any suggestions? Just shoot RAW and try to change then? My photo program that comes with the Nikon does not go up to 20K when adjusting the RAW files. I think the highest setting is 9800. Trying to dial in the colors.

Looks like the 38 special in the link, not the one in your picture. That is the bigger brother.

I have a 4 year old Traeger wood pellet BBQ. Smith and Wesson model (like the Little Tex, but with some stainless and the digital controller). I am trading up and they will give me $400 trade-in. Thought I would offer to anyone in the club at that price. Comes with the cover. Let me know if interested, Ken

I have one that you can have. It is blue, leather, and obviously older, but I slept in it when I had my hernia operation and it works for that. Will be home after noon today. We are in Ridgefield, WA. (exit 14). Ken 503 807-6264

I have one with a new, never used impeller. $75. Ken

I have some if you need. I am in Ridgefield (exit 14 off I5)