bluecheese

Eductor added to list of for sale Post updated

Clay PM sent

BoBkat sent you PM

I have someone interested coming to look at it. I'll let you know if does not go through

Epic PM sent!

Jenmac the 70 G tank is a Sea Clear aquarium 4x20xx15 Epi sent you PM Drew- Topper has claimed the rio, but Once I take the tank down I may have another Rio 2500 for sale depensing if it goes with the tank or not.

yes Kenny You did! Thanks!

POST HAs Been UPDATED 06/28/11 The tank is gone. Thanks todd! Still plenty of stuff to go 4- 2 ice cap 660 Ballast- $115 each + Ice cap Fluo sockets/ $5 each socket- New Price $75 With Harness 5- Ice cap 175 W MH Ballast- $90- New Price $65 6-Blueline Electronic Single 175W MH Ballast $90 + Matching wiring/socket and reflector $45 New Price $75 for Both 13-ARO ballast VHO- $40 14 - 48 inch reflector and bulbs+ caps + harness $45 Both above For $60 17- MKR calcium reactor- $120 New Price $75 18-Aqua C Urchin Pro in sump Protein skimmer - rated for 75G- $75 -New Price $65 18b: protein skimmer(no brand)- for up to 150G -$75 with pump New Price $45 With Pump Pump- Goes with Skimmer ( above) 19- Custom built Protein Skimmer- rated for $300 G- Brand new - $200- New Price $150 20- EtS - protein Skimmer- 800 XR equivalent - 400G- $350- New price $275 31-Mag float- For glass 200 G brand new $10- for 125 g used- for 70 g Used- $5 32- Ice Cap Fans and equivalent- (3) $25 New Price $15 33- Ocean current rotator- (2) $20 each New Price $15 34-30 G glass tank (2 of them) - $50 each 35- 20 G glass tank drilled + fittings- No top- $25 36- 20 G Glass tank with top and lights- $25 37- 70 G acrylic tank -4x20xx15 Sea clear . can be used as a sump- has scratches- $60 New Price $40 38- Wet DRy system- 25G Sump- with balls -$55 New Price $30 39- Fluo bulbs- 6 and 4ft long- $5 each- 41 Tsunami Wavemaker : $55 New Price $30 42:Small sump (10 G glass , and 20G acryl)- $25 and $40 45- 48" VHO Fluo fixture with reflector-$90 New price $55 hooked up with the ARO or ICE cap 660 ballast 46- MH reflector + 175 W MH socket- (2) - $50 (custom made) and $60 (showing the $60). New price $25 custom made and $30 ARF reflector 46b: MH reflector with 250 W MH socket- $65- New Price $35 47- 400 W Lumenarc III MH Pendant (2) The best of its class! see better description below in the thread- $120 each New Price $100 48- TDS meter Milwaukee- new-$35- New Price $15 55- Fluorescent Tube holder (pair) holds 4 tubes: $10 56- Sun Day Eductor- Increases your flow! Brand new In box- $25- New price $20 58- Sequence Pump- barracuda - $250 4500 GPH - VERY QUIET!! New Price $175 63. Water change container + float: $10 64. Railing; This railing was a $250 kit + the frame to hold your lamps, veery cool set up. It allows to move your lights away from the tank for maintenance and bulb change. The frame is monted with a poulie that also allows to lift it and up and down. Very very cool for the entire thing (without reflectors or lights). $50 NEW pRICE $40 65. PFO lighting Runs 2x 5" 0r 6" with end caps: $50 New price $40 Make OFFERS!!

PM on the foxface

Jeff, Ryan, John, Michael, Scott Thanks Lots of very good points. Very useful info guys! I'll start to contact some of those sources. So is this the kind of job that would take a full week-end from digging to compacting? Or would you plan for more time? Just trying to decide on timing for renting equipment. The area of work is about 10 feet wide and 35 feet long. So do I take it that the crushed concrete idea is not so good ? See link in previous post.

Does this look reasonable to you guys? http://www.build-yourown-home.com/driveway-materials.html

Cool John!

Thanks Ryan lots of good info. HD does rent those, they look like fun toys , but not sure how long the fun lasts (wife)

Great thanks for replies. so you would recommend going for gravel, especially if I am not sure will keep that thing for a long time (which is the case). Cost is always an issue but durable and not a source of problem is probably teh biggest one here. Would you do Sand + Gravel or just plain gravel. If going for concrete what kind of cost would I be looking at? RV is about 24ft long. The area in question is not leveled at all it has a gentle slope to one side so I gues the first step would be to dig it up and level it with more dirt Then dump gravel 3/4" (is that the grain size or the layer size) How thick of a layer do you put?. Can you rent the compactors at HD? As you can see I am very naive about the all thing...

My mother in law just bought an RV and we want to park it by my house. The spot in question is currently covered with grass. Does anyone have experience in building a driveway for an RV. What should we be looking for, can we do it ourselves or shoudl we contract someone. Would dirt and gravel do it or should it be concrete etc..? If anyone has info or knows anything about it please dive in as she is getting that thing this week-end

Skimmer Skimmer Sent you PM

Tang Sent you PM

The electrician did not play with any of the circuits or breakers. He just looked at my box and told me I had plenty enough to run all my lights and pumps. He probably meant splitting my lights on different circuits. Which I am currently doing with extension cords but one line is out of the fish room so I would have to run a permanent wire there maybe from the back of the room. One more hole to drill I guess. (probably not the last one)

Cobalt, it's a 15A breaker not sure if it has GFCI protection. But I added a GFCI plug in the room. The Double HQI is rated at 9A and then I have 400 W VHOs. I have been able to split my electric on 2 circuits but I am still short for the 3rd 400W. So what you say makes sense. What do you recommend? Here is a shot in between storms

Great progress Jay. This will look awesome once everyone starts working on it.

Hry Jay, is this from Bob's tank? I am interested in Acro Tortusa and Purple Cap (2 frags at $15 that's cheaper than 1 frag!!) (laugh)

Yes DRained, it. Moved it. Consulted. Refilled. Consulted. Added Sand. Consulted. Added Rocks. Consulted. Plumbed the sump. Pumps. Top off. Then I added almost all my LR and corals that survived the crash and 1 fish. And after 1 week the rest of the fishes that survived the crash. During the transition I set-up the rail and put temporary lights in the old canopy until we are ready to encase the tank. the wood panels still need to be adjusted and framed and the doors (made by Sol) added. And my Ca2+ reactor needs to be turned on. For now 1/2 of my livestock that survived the crash (in the holding tank) seems to be recovering and signs of new growth are there. Most of my Beautiful fishes are gone, so I am slowly repleating them. I got a Goby from Scott (Spectra) and a Mandarin and a Tang from Curtis (Cocker98). The Goby behaved himself originally but he is now responsible for the sand storm you can see in the pictures below A few of the big SPS did not make it either, but some of them were fragged and there is hope the frags might recover. I especially miss my purple tip Acro and that nice thick branch yellow birdnest I got from Izzypop. This was a quick grower. I am still fighting with wattage as anything above 1200W of lights seem to trip the circuit. Right now I am splitting frtom two different circuits but it does not seem right. My electrician originally told me I had more than enough to sustain all those watts but I am not so sure anymore. Do other people have the same problems. Did you have to upgrade? Or just split ...

Bingo!! She said: Don't you think we should move it a tad more to the left!! DOH!(wife)(threaten)(nutty)(enforcer)(flame)(daz)(cussing)(booboo)(gavel)(comp) Well a tad was about a foot!(puke)

You guys are Funny!! Well I filled with regular H20...no leak I emptied the tank and filled with Saltwater, sand and a couple pieces of LR...No leak Two days later ... My wife comes in the room to look at the tank and that's when ...(wife)DOH!