PowderBlue

Is the big carpet sold?

I’d also trade for a Goni or nice colored frogspawn

PMK is SOLD

gotta be at least number 11 teen 😂

I was lucky enough to purchase the very well known Suncrestreef tank. I have kept a lot of the equipment from his entire setup and changed a few things. I transferred all my livestock over from my previous setup and for now have everything finished. I may change the aquascape a few times before I’m fully happy with it, but with needing to have the transfer done in one night, after an 11 hour day at work. This is what I’ve settled one for the time being. I love how well it’s plumbed and how quiet everything is. Here’s a breakdown of most of the equipment Reefer 425xl with a custom made square aluminum channel tank brace to allow for the bigger sump Trigger systems sapphire 34 sump with fleece roller Nyos 160 skimmer with the swabbie added 2 radion gen 5 xr15 pros Apex with orp, salinity, temp, ph, gro fuge light, Cor20 return, Neptune atk, fmm to monitor the flow through the uv and return 2 gyres with ice cap through the apex 300 watt brs titanium heater I’m not great at wire management without a control panel so I’m thinking of having a panel built to hide all the wire in the future. Livestock is as follows 2 percs 5 chromis 1 Hawaiian yellow tang 1 hippo tang 1 coral beauty 1 algae blenny I might add one or 2 more fish but that’s undecided. I have a full clean up crew from reef cleaners for a 120 gallon tank. I can’t wait to start getting corals added but I’m just letting the tank settle for a couple months as the previous tank was fowlr.

A lot of beautiful livestock in here. I wish my tank was ready

I have quite a few things I’d trade for a mp40qd neptune pmk 24 inch 8 blue ATI Neptune auto top off 2 Neptune wavs neptune ddr container

Haha same thing I almost did 😂

Works as it should, has a diy tank mount but you could easily just buy the gooseneck. Was used low intensity as a fuge light. I’m in Oregon city 70 bucks

My new setup has a roller mat, I’ve been doing some research and some people love them and some people say they strip so much they have to dose nitrates. I’m going to keep a close eye on my system I’ll keep you posted!

When I ran cups I did filter floss one one(easy to swap every couple days) and a bag of chemipure in the other and it seems to have done well.

I remember when that tank first went up. It’s beautiful, someone’s getting a steal on that.

Bump just a couple weeks left before I can post it on R2R 😊

Text is best I work 55-60 hour weeks starting this week and I’m also gone at utv takeover next week so text is best but feel free to pm me and I’ll check as often as possible 5032674537 All of this equipment came off of Suncrest Reefs tank. I purchased his system to keep the tank, stand. Dump, and some of the apex setup. The rest im going to part out. Not looking for trades and my prices as firm as listed. I’ve checked R2R and will try there if they do not sell locally. I am going to post most things a little cheaper locally than I will on R2R so get it while ya can 😊 SOLD Neptune sky lights, with custom 3d printed light diffusers- $625 each I have 2 of them they have a 3s printed slide mount to work with ecotech rms mounting arms SOLD SOLD ecotech rms mounting arms with track to mount the sky lights to them-$70 eachSOLD SOLDNeptune Trident with new A,B, and C reagent and calibration fluid, and aqua bus cable. $450SOLD Neptune Cor20 return pump-$225 GRO fuge light-$70 2 WAV pumps-$ 130 each just the pump kit no modules Apex auxiliary power plug -$10 Neptune DDR container-$150 Apex AFS-$70 Neptune ATK with module and pump-$175 Neptune Black display-$50 Par metering kit with handle to hold meter deep into the tank-$200 6 way switch toggle box for quick on/off for your pumps, skimmer etc-$100 PM2-$50 Breakout box-$20 older style i will have more for sale if the buyer backs out on my current tank. As I am going to sell my current setup and use the Reefer 425xl from this setup I just purchased. I’m in Oregon city, and will ship and buyers expense. You cover shipping and PP fees.

Prefer clean cooked rock. Need about 50-60 pounds. Let me know what you have, where you’re at, and how much! Thanks everyone!!

PENDING

Ah yea I skim read his reply 😂 if the panel is tempered I wouldn’t recommend trying it. Most of the smaller tanks are not tempered, I know even side panels on like a 40 breeder are not but definitely steer clear of the tempered tanks for trying to drill them.

There are drill bits made specifically for glass, I didn’t drill this one myself but I’ve drilled quite a few in the past. If you order a good drill bit and take your time, it’s really not that bad. I practiced on old cheap tanks before I drilled my first 40 breeder. There are quite a few videos on YouTube also.

Beautifully done! I need that powderblue 😂

Incredible!! What tank is that?

Well this is what’s in the living room at the moment but that will change very soon!

I am going a different route with my tank so I’m selling the 5 foot one I have. Glass is in great shape, No major scratches, comes with a 60x18x21 100 gallon tank, center glass overflow with acrylic weir, custom built stand, 20 gallon long sump, with a 10 gallon plumbed into it for a low flow refugium, I have a custoM built light rack I will include with it, and can also include custom built kessil light mounts if you want to run kessils over it. 5 foot dual bulb Geissman razor retro fit kit, ATB 840 skimmer with swabbie, pump for fuge, and a 300 watt heater. You will NEED, main lighting, return pump, power heads, live rock, sand, etc. it’s very close to a turn key setup. I’m in Oregon city. No trades. I can lower the price if you don’t want the skimmer and swabbie. Price for everything is 800 bucks. I will give you the two frag racks in the tank covered in Zoas, gsp, pulsing Xenia, and I can likely give you some live rock that’s been running in the tank for years to help you cycle if you’re starting fresh.

A few things for sure 😊