Jump to content

Tat2d

Members
  • Posts

    344
  • Joined

  • Last visited

  • Days Won

    5

Everything posted by Tat2d

  1. I'm down to the last few corals, one clownfish, and 40+ lbs of nice rock left. In the interest of getting it gone, I'll take $120 for all of it. The orange/green monti cap isn't part of the deal. It is already spoken for. Also dropping the price on the tank/stand/canopy to $100 and the lights to $225(the new halide bulbs cost me $130 alone) and $15 apiece for the korilias Here's pics of what's left of the rock/corals
  2. Still don't see it in the classifieds(scratch)
  3. star polyps, birdsnest sold
  4. Lokani and about 30 lbs of rock are gone. Thanks Batchelor:D B Still have approx 40lbs of nice BIG pieces of LR left, and corals, ocellaris and LS
  5. And here's a link to a website that sells it with specs http://www.aloha-aquariums.com/servlet/the-252/Coralife-Kit-Aqualight-Pro/Detail
  6. Hard to get decent pics, but here's some. It is a one piece reflector unit that you attach in the canopy.
  7. Works for me Batchelor. I'll PM you my number, and you can give me a call for the address. Also have a korilia 2 and a korilia 750 $20 each B
  8. All pics taken with 10k halides with pc actinics Here's the coral pics and prices Orange digi $10 Pink with blue/purple polyps birdsnest $15 Zoa rock $15 Green digi $10 Unknown acro $10 Blue/purple lokani $35 red/pink Milli. $20 tan/blue tip Milli$10 Star polyps $15
  9. Iwaki is spoken for by Algae
  10. That's funny, I don't care who ya are(laugh)
  11. Reactors and chiller are yours then. They aren't plumbed in, so whenever we can work it out is fine. Give me a call and we can work out the logistics. You are sure about the chiller this time, right? B PM replied to algae.
  12. I have decided to part out the 55. The equipment will have to wait until I get rid of most of the livestock, but I'll post the prices anyway. 55 all glass tank with corner overflow, all glass pine stand and canopy $125 Coralife 2x150watt halide-2x96watt actinic pcs-4-1watt moonlight all-in-one retrofit lighting setup with 2 month old XM 10k DE halide bulbs, fan and timers. $250 Iwaki md 40 rt pump $75 2 media reactors (1 kent 1 two little fishies) with 1/2 bag of gfo and 2/3 of a container of carbon $25 approx 80+ lbs. of very nice LR 2.25/LB. 2-3 inch sandbed $20 misc. zoas $15 2"x3" chunk of star polyps $15 small ocellaris clown $10 I'll get back on in a bit and list the SPS with pics and prices. via aqua polar bear cc-50 chiller-1/4 hp, works great! $225
  13. I wouldn't do it if I could avoid it. It's just gotten to be too much for me to deal with while I'm injured. and with no definite timeline for recovery.......... And workman's comp doesn't pay as well as working. Soooooo, here we are. Pesonally, I'd eat top ramen for a few months to avoid this. But my family deserves better than that;)
  14. It kills me to do this(sad), but here goes. 55 gal. All Glass tank with built in corner overflow. All glass pine stand and modified canopy(made taller for halides). Coralife 2x150watt halide-2x96watt actinic pcs-4-1watt moonlight retrofit lighting setup with 2 month old halide bulbs and timers. 2 Korillia powerheads. All Glass wet-dry with bio-balls removed. Iwaki 40 rlt return pump. PCI skimmer with pump, stealth 200 watt heater, brand new JBJ ATO unit. Fully stocked with approx 80 lbs. of nice LR, 2-3 inch sandbed, about a dozen nice SPS corals, Duncan, tyree green toadstool, misc. zoas, star polyps, featherduster, 4 firefish, yellow watchman goby, lawnmower blenny, yellowfin wrasse, and an ocellaris clown. via aqua polar bear cc-50 chiller-1/4 hp, works great! $750 for all of it. Or I'll sell the chiller seperate for $250, and the complete, stocked system for $550 If bought as a package I have a couple of buckets full of extras. mag 7, rio 2500, rio 1100, 2 media reactors and media, extra heater for mixing water, misc parts and tubing, 3/4 of a bucket of instant ocean salt, a 30 gal tub for mixing water, and a box full of test kits and chemicals, nets, and tools. If I don't get any interest in it as a package in a couple of days, I'll start listing individual prices to part it out(livestock first).
  15. I have a couple of media reactors I was planning on putting on my 55 gal. After a lot of head scratching I have realized I don't really have room for both. would it be a problem if I ran both carbon and GFO in the same unit with a couple of sponges between the two? Thanks, B
  16. I got all the sand from her tank, and have had no problems. My sps are growing like weeds
  17. After tossing this around in my head, I'm going to officially take this off the market for now. So, sold to me(laugh) B
  18. Iv'e sold a few tanks over the years, and it seems to be easier to sell them parted out. And it seems to bring more money too. That being said, I'd love a list of your SPS corals:D Awesome tank BTW. If I was in a better financial position, I'd be making an offer right now! B
  19. Not a problem Brad. I'm sure after a couple more days of this heat, I won't have any problem selling it;) I'm kind of starting to wonder if I shouldn't hang on to it as cheap redundancy. Heck, It wouldn't be the first time I've sold something to myself(laugh) I'll definitely take you up on the shooting sometime, after this shoulder heals up B
  20. That's a great idea. hadn't thought about that:D I'd be willing to ship it if need be
  21. Price reduced to $250. Bump:D
  22. Would you be willing to hang on to a 2" frag until I can find someone either heading from PDX to Eugene or someone from here going up? (just a matter of time, seems like someone is making the trip at least once or twice a week(laugh)) I would normally be more than happy to come get it myself, but I tore my rotator cuff and my right arm is in a sling until they decide if surgery is necessary. Both my cars are stickshifts, so no driving for a while(sad).
  23. Hey all! I have a Via Aqua Polar Bear 1/4 hp chiller for sale. It works great! Put a monster ac unit in my house 2 weeks ago, and the chiller has not come on since. Tank stays nice and cool now:D Here's the specs: Dimensions - (11.75" Tall x 12.75" Wide x 15.75" Front to Back) Via Aqua Polar Bear 1/4 HP Chiller Details: - 15 degree cooling up to 125 gallons - 380 Watts - Controller can be set as low 56 F - Flow rate through chiller is 100 GPH to 400 GPH - Adjustable temperature controller. Constant digital temperature read-out - Titanium heat exchanger - The R134 refrigerant meets all environmental and international guidelines - Thermal protected compressor I'd like $250 for it. It is in great shape, other than a couple of spots where the previous owner spilled glue on the outer cover(see pics)
×
×
  • Create New...