Jump to content

Tank and equipment


bamburgb

Recommended Posts

Hi All,
 
So I am getting out of the hobby and am about to start selling my equipment. Right now I am trying to sell it as a whole because I don't want to be left with odds and ends of random equipment, here is all I have.
 
-180 gallon tank
-30 (maybe 40) gallon sump
--Apex brs special addition (Temp probe, Water level, pH)
-Trident + 6 MO reagent un used
-Neptune dosing container (3 slots 1500 ml each)
-jeabo dosing pump
-Hydro ATO
-3x app controlled relassy light - did good for me growing SPS,LPS, and softies (might even have a spare somewhere)
-Aqua Max Calcium reactor + 10lb CO2 tank (Might be a 20 have to double check)
-Coralview 6x twist UV sterilizer (I should have some extra bulbs around here somewhere for it)
-Bubble Magnus Curve 7 Protein skimmer
-2x Maxspect gyre xf250's
-Miscolanious dry goods and some fragging materials 
~100 lbs of rock (might be more might be a little less I dont remember how much I have since its been a long time since I bought any).
~ 120 lbs of live sand (very fine)
- 2x TLF phosban 150 reactors.
- 4 Stage RODI system with 150 gpd add on and new bag of DI resin
 
I am sure Im missing something.
 
I am asking $1500 OBO and am located in Scappoose. I will help load (and if not to far away I can even come and help unload).
Edited by bamburgb
correction
  • Like 1
Link to comment
Share on other sites

3 minutes ago, jtichenor said:

I'm assuming your stand and hood are also included?

Yes, the hood I made and went a little too long so it could be improved on but it has been being used since July with no issues. i attached a pic and it’s like that on both sides. 

The stand is the typical black pinewood stand with some cosmetic damage (thanks to a dang cat). 

 

image.jpg

Link to comment
Share on other sites

14 hours ago, Parzifal said:

How long has the tank been running?  

-dimensions?

-glass or acrylic? If glass starphire?

-what size return bulkheads and how many?

-will my wife be happy with this purchase?

 

 

Saw his setup yesterday, it’s pretty cool

Link to comment
Share on other sites

14 hours ago, Parzifal said:

How long has the tank been running?  

-dimensions?

-glass or acrylic? If glass starphire?

-what size return bulkheads and how many?

-will my wife be happy with this purchase?

 

 

Right now it’s pending pickup, if they back out I’ll let you know.

Dimensions are 6’x2’x2’

glass tank

i believe returns are either 1/2 or 3/4, bulkheads going to the sump are 1 or 1.5 (again I have to double check). There are 2 of each. 
 

will your wife be happy, that I cannot answer haha when it’s all clean and everything it can look great but you will spend a lot of time with the tank so toss up. 

Link to comment
Share on other sites

On 4/11/2021 at 6:54 PM, Parzifal said:

How long has the tank been running?  

-dimensions?

-glass or acrylic? If glass starphire?

-what size return bulkheads and how many?

-will my wife be happy with this purchase?

 

 

Still available, person was suppose to come by today but haven’t heard from them in a few days now.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...