Setting Up Clockwise/Anti-Clockwise flow pattern with WXM and MP's

[obrien.david.j]

Success (using new virtual outlets)!

A. Yes, the OSC command is working overall.    The original OSC ... Then ON worked fine.  (at 100% of sand moving MP strength).   I confirm the oscillation with a flashlight.

B. New Virtual Outlet + Profile programming works!  

• MPvOSC_front: OSC 000:00/005:00/007:00 Then ON
• MPvOSC_back: OSC 007:00/005:00/000:00 Then ON
• MP60_Front & MP40_Front:
  Fallback OFF
  Set OFF
  If Output MPvOSC_front = ON Then MP-Front-Pr
  If FeedB 000 Then OFF
• MP60_Back & MP40_Back:
  Fallback OFF
  Set OFF
  If Output MPvOSC_back = ON Then MP-Back-Pr
  If FeedB 000 Then OFF

Thanks for working through this (more complex than expected) programming!

Now I just need to move the sand back, and find the right speed that doesn't blow the sand around.

 

[SuncrestReef]

Wow, it all seemed so simple when you first posted the question.  I still have no idea why the OSC directly on the WXM outputs won't work properly, but glad to hear it works with the virtual outputs.

Unfortunately I don't have a WXM or MP's to further test and investigate on my own.

[obrien.david.j]

9 hours ago, SuncrestReef said:

Unfortunately I don't have a WXM or MP's to further test and investigate on my own.

I know. I bought your WXM.   

Thanks again!