reefnjunkie Posted May 25, 2012 Share Posted May 25, 2012 As luck would have it the shaft on my Askoll 1500 broke and the replacement cant ship until Tuesday of next week due to the holiday DOH! and I wont get it until Thursday. Anyone have a large pinwheel pump, a modded pump for a skimmer, or a large skimmer for that matter that would help . My system is close to 600 gallons Link to comment Share on other sites More sharing options...
grassi Posted May 25, 2012 Share Posted May 25, 2012 Is the shaft custom for that skimmer or just a standard Askoll/Laguna 1500? You might find that pump at a local pond store Link to comment Share on other sites More sharing options...
reefnjunkie Posted May 25, 2012 Author Share Posted May 25, 2012 Is the shaft custom for that skimmer or just a standard Askoll/Laguna 1500? You might find that pump at a local pond store The pinwheel is pressed onto the shaft Link to comment Share on other sites More sharing options...
steelhead77 Posted May 25, 2012 Share Posted May 25, 2012 If all else fails, since the pinwheel is pressed on, you might be able to find some stainless drill rod or pic shaft at Graingers in Portland. You just need to accurately measure the diameter with a micrometer to get the right size and find someone to cut it to length. This would work until you could get the replacement. If you were closer, I could make you one in about 5 minutes. Link to comment Share on other sites More sharing options...
Bicyclebill Posted May 25, 2012 Share Posted May 25, 2012 I've got an Aquamaxx 150 skimmer with a Sedra 7000 pinwheel pump you could borrow. I don't know that it's big enough by itself. I also have an ETSS 600 downdraft with an Ecoplus 1267 pump that might do the trick by itself. You're welcome to borrow either or both. The ETSS is at Frank's so I'd need to grab that from him. Link to comment Share on other sites More sharing options...
reefnjunkie Posted May 25, 2012 Author Share Posted May 25, 2012 I may have found temp solution. Link to comment Share on other sites More sharing options...
markvo Posted May 25, 2012 Share Posted May 25, 2012 I can lend you an ETSS 1400 and a large pump to run it if you want Brad. - Mark Link to comment Share on other sites More sharing options...
reefnjunkie Posted May 25, 2012 Author Share Posted May 25, 2012 Thanks for the offers and ideas-Wanareef had the same pump with pinwheel (actually the next size up) and we are skimming again. The pump must have thought I was leaving for the weekend so it decided to snap the shaft so it would not skim and then out of coincidence something would have died. I hate it when inanimate objects start thinking. Thanks again Link to comment Share on other sites More sharing options...
Burningbaal Posted May 25, 2012 Share Posted May 25, 2012 I hate it when inanimate objects start thinking. best quote of the day Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.