BeardUp
-
Posts
226 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Events
Store
Posts posted by BeardUp
-
-
-
3 hours ago, ShoeCrew said:
Thanks for the heads up. I have been using the ones at the bottom for more than a year now. What is the failure mode? Does it crack and start leaking?
I found they would crack then split at the top lip of the cut out in the middle where it bows out from the water. I could get a few good grows out of them before I noticed small cracks on water changes. I am sure mine went faster due to all the light.
-
On 4/3/2023 at 9:02 PM, ShoeCrew said:
This is my under the stairs saltwater station. I have a drain access. When I want to do a water change, I dump the water in the refugium by opening a valve at the bottom of the tote(It is not easy to see. ) and pump the water from the bottom tote to the bottom. Bottom tote is connected to the fresh water tote with a float valve.
Watch those totes closely. I used to use them for a hydroponic set up and had to change them out frequently. They tend to let go all the sudden and much quicker with grow lights.
-
Unfortunately its not compatible with the Jr, Classic, or lite.
https://www.neptunesystems.com/getstarted/trident/faq/#32a7d407c794df15c
-
16 minutes ago, islandVib3s said:
Hmm. Maybe. Lol what do you want for them?
How about as partial payment for being on the board.
- 1
-
22 hours ago, islandVib3s said:
I'm also looking for fillers like Kenya trees,leathers,I have pulsing xenia already. Thx🤙
I have a green sinularia that is out of control as well as a bunch of GSP if you want.
- 1
-
It looks like it's trying to hang on. Keep your water clean and fingers crossed. I would leave it in if it does die. I had a hammer die and about 6 months later I noticed a bunch of little bumps on the skeleton. About a year later and I had a huge colony.
-
I used my gopro on a tripod once. It worked out well.
- 2
-
I have a redsea nano max complete that I would totally trade for your waterbox 😛
-
I have seen this tank in person and the pictures don't due justic to how stunning it is.
-
-
My tomini tang has gone 3 days without food several times and is still trucking along.
- 1
-
16 hours ago, Micah said:
Looks a little something like this: https://www.thingiverse.com/thing:2811807
I have been looking at printing one of those for a long time but did not know if it would really provide more than a place for detritus since I have a fuge with cheato and live rock. Do you see a bunch hanging in there?
-
Hi Ash, if you dont get any takers her, Cays and Wet Spot Tropical Fish have both taken in fresh water fish from me. I know there are other stores in town that are willing to accept fish. Good luck!
-
I have one of those and it branches out like that too.
-
What a pretty dog!
- 1
-
-
16 hours ago, Micah said:
It draws off the screen for me on a couple of the sites tabs/pages. Probably just a simple CSS margin error. I was just poking fun.
it was doing the same for me. I had to turn off PiHole. I assume they are using amazon web hosting as any site hosted there my pihole breaks due to the ad domains.
-
Would a mars aqua work?
- 1
-
Can I get added to the list again please?
-
-
I am a supporting member
- 1
-
Do you mind sharing your vet? I had called a few places in the past trying to get it and none would prescribe it.
15 hours ago, goldenbasketreef said:I source it from my Vet, it is pure Fluconazole powder form not diluted like Reef Flux but the cost about the same
-
On 10/10/2021 at 12:06 PM, Trailermann said:
With each power outage, I have to reset my Classic via the Display. PITA. Is there a simple UPS that is fast enough to protect the Apex? Would 600 VA be big enough to keep pump, power heads, skimmer, etc (excluding lights) going for 30 minutes?
My classic was doing that too. I have now set a static IP for the Apex in the controller and on my router. This resolved the issue for me. What I found is that the Apex boots faster than my Edgerouter and would ask for an IP but not get a reply so it would auto assign 169.0.0.1 which is outside of my ranges so it got blocked. Now that it has a static IP in my subnet, it cant default to one that does not work. Once the router and switches are live and ready the Apex is already set up and no issues.
WTB Magnetic Frag Racks
in Equipment
Posted
I had 3d printed a couple but ended up buying 2 of the @PNWCustom ones from @CuttleFishandCoral and have not looked back. They are top quality.