Cobalt

It did, but I grabbed a rubber seal from the old carbon block to double it up and got a good seal now. 🤷‍♂️

Just did my annual filter replacement on my unit, and the carbon block filter is a tiny bit lose in the filter housing. It’s lined up correctly I think, but I noted there is about 1/8in of play in the filter even with the housing screwed all the way tight, as if the filter is an 1/8in short. But the gaskets on either end are present. This means water will pass around the filter rather than through it, correct? Did I get a bad filter?

I’ll take it. Sending you a PM.

Looking for a new space saving top-off water container and prefer it to be rectangular and tall. 15g tall preferred in the Portland area but will consider a 10. Ideally longest dimension is no more than 20in

Availability and prices updated.

Hey Ho Ho Ho! I’d like to use one of the club PAR meters when the next one is available. 🙂

Garage cleanup time… I'm located just South of the Barbur blvd Fred Meyer. I could potentially meet at C&C, but don't mind people coming by my place at all.

Koralin reactor and 20lb co2 tank with reg. I could never get the reactor dialed in and went back to 2-part $170

Theilling roller Matt roller filter with two new rolls of filter media. Took up too much space in my sump space. $140

40g breeder that is rear drilled with a CPR Aquatics overflow that needs a couple new bulkheads. Asking $80 for that. 

Ice cap v2 24v battery backup for all 24v pumps $70

2x icecap 2k gyre pumps with extra set of rebuild parts. $70 each. No controller, You will need a controller to run these.

Reef Octopus Varios S2 Pump $125

Simplicity DC-1000 pump $50

Aquatop 375gph pump $20 (was paired with the reactor above)

Apex DOS with power supplyand aqua-bus cable $125 Works great via Fusion, however one of the manual dose buttons is a little "sticky" and requires some fiddling or some time to deactivate if you press it on. never comes on by itself though.

Apex ATO/RO kit $100 includes:

FMM, 2 optical floats, the solenoid valve, one FS-50 flow sensor, two FS-50 flow sensors, another optical sensor, two 24V power supplies, two aquabus cables, and a PMK pump that was giving me trouble but it could have been a second FMM module that failed. I’ll give you both FMMs - the failed FMM might just be the 24V output -so you could still use it for flow or leak monitoring potentially. 

Respectfully I am offering this stuff up as first come first served / sellers choice. If you feel I misplaced anything (I didn't do much research), make me an offer of what you think is more fair. Happy holidays! 🙂

Hello RR, which is the 2nd and 3rd colony photos? I'd like a frag of each or whatever is left.

Have any green ricoedia Floridia? I'd like a multicolor.

Are you West of the River or East? Thanks

On 12/13/2021 at 7:02 AM, goldenbasketreef said:

I have all of that shop.goldenbasketreef.com

Ordered!

Anyone in Portland have any of these?

Looking for a used WAV pump in PDX 🙂

All frags are at least 2in with multiple branches unless indicated otherwise and have been healing for 3+ months.

1. Purple/Green Staghorn (4in) - first photo foreground

2. Purple Stylo - colony first photo right (frag will be 2.5in with 3 branches)

3. Utter chaos Zoa  -  not pictured - single polyp at least

4. Green (birdsnest?) long polyp aka “Fuzzy” - 2nd photo

5. Forest Fire Digi (won’t be healed, fresh cut, at least 1in) - 3rd photo left

6. German blue digiata - 3rd photo upper middle

7. Orange monti cap - 1in x 1in frag approx ( seen in FTS)

$10 a frag - please chose at least 3. Buy 4 get one free. Or all 7 for $50. Can meet at cuttlefish this weekend. Looking for Zoas, LPS, or anything really.

Are the displays compatible new to old or old to new?

Is the bristletooth tang still available?

I have a calcium reactor setup for sale. It comes with a nearly full Co2 Bottle, 9 month old regulator with solenoid for a pH controller, and a 4 year old reactor with media.

I am also selling an Apex Classic that could be your pH controller. For just the Apex classic and 7 month old pH probe, temp probe, no EB8 or Display mod. 

Preference given to someone who wants both, but if that doesn't happen in a few days I'll part them out. I feel like $450 is fair price for the package but open to offers. 

I’m in Portland and getting 15. But thanks for the reminder to check, looks like my color changing DI is done, still 0 tdi on the output thankfully.

I am a supporting member

Picked one up as well, thanks!

Curious about the bulk pricing - surely its possible we order enough to qualify for the that tier pricing, but is that not an option for this order?

PM sent on powder blue tang

Let's just stay I put UV in my new Reefer 525 build for the first time in a system. Didn't realized how well it worked until I accidentally left it off for a few weeks. I had to clean the glass twice as often in that period! Maybe it was related to something else... someone can correct me if I'm wrong.

Yes its only 10 months young... so a little early -knock on wood -no cyano, hair algae, bubble algae, bryposis, etc...... so far so good.

I mean... if you want to get a little out of your way to sell me jut the GSP... I'd take some. I could meet at Cuttlefish Sat or Sunday. But realize there's lots around so don't feel obligated, I'll find some. Stuff grows like a weed..

Thanks guys, yeah realized my phosphate was too low. I think leaving the refuge in light on 24/7 while I was out of town sucked all the phosphates out but not the nitrates.  Ordered up some phosphate supplement regardless

31 minutes ago, CuttleFishandCoral said:

I think it looks like it’s on the mend. I doubt the nitrates had much to do with the reason it looks rough. Looks like maybe it got stung or something to me. But who knows. A dip will help prevent a secondary infection. 
 

Thanks Jeff. Iodine dip right?

Thanks Jeff. Iodine dip right?