Jump to content

Reef Octopus skimmers


BoringDave

Recommended Posts

The pump it self to has little rubber feet on it then another set on the bottom of the body. But I did notice putting it together that they machine the hole in the side of the body real tight. You can just get the Venturi though the acrylic. They should have used a silicone grommet of some sort right there. By doing what they did kinda cancelles out putting rubber feet on the pump. Makes no since? Put rubber feet on one end of the pump and hard mount the other.

Link to comment
Share on other sites

Well I figured out what I did wrong. When I got back from C&C last night it was about 7:30 and I was just burnt out from traffic and driving. I set it up didn't read any instructions. I stuffed the air tube way up inside the muffler. But the noise it was making sounded like a pump running. So tonight when I got home I started tinkering and this is what I came up with.

71af435e79fd1ff3063f9db96ac5ce51.jpg

It didn't matter how much of the air tube I pushed in or out of the factory RO muffler it sounded like poo. A little bit of Google and bang! Diy skimmer muffler. Its still a bit noisy but manageable.

 

Thanks TheClark for giving me a few ideas to work with.

 

Dave

Edited by BoringDave
Link to comment
Share on other sites

Sweet!  If it is loud sucking air, that is a good problem.  You have an air sucking machine, all good on a skimmer.  One thing to consider... you can double up the mufflers by chaining them together, might silence it once and for all.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...