XrayGuy

PM sent

I ended up getting one from ssappington, so I am good to go! Thanks for all the input peeps

Oh and I got the aquarium specific silicone to use on my baffles for the sump, just haven't put them in yet. And I will be getting the conduit I need to make my light hanger this upcoming week too...would do it this weekend but I work every weekend, so I have to wait.

Ok a couple of updates. I decided after talking to Jeff and Steve (ssappington) about ATO, that I am going to use the Hydor ATO with the 3 prong temp sensor along with an aqualifter. I also got y my RODI unit setup and running! My plumbing is 95% complete on the tank...just need to get my return pump and then I can plumb that last little bit. I also think I am going to paint the PVC black so that it is less of an eyesore since the return plumbing is going over the back of my tank due to the Herbie overflow. I also finished leak testing the tank and overflow and all is well! Tank is now in its final resting place in the house and awaiting my return. Here are some pics:

PM sent

PM sent

As the title says, if you have an extra one of these lying around(that is in excellent shape), lets help you turn it into some $$. Let me know what you have. Thanks!

I like eBay for buyer protection along with PayPal. I also only order from US sellers because I have had issues with buying things internationally before (China and Italy). When I go to pick up my RODI at Cuttlefish, I will talk with Jeff about diff options for ATO. Thanks for the info!

[ATTACH=CONFIG]13651[/ATTACH] Ok so I am thinking that I want this so that I can dose as well as use it for continuous ATO. I realize it may take a bit to dial it in just right to match my evaporation rate, but I will eliminate dealing with float valves or switches. Water may even be more stable? Thoughts?

I do not have an ATO plan yet. I know I want to have a resivoir of some kind near the tank though. Ideas on a good one? I need to do some research still

So to make the water level close to optimum for the skimmer, should I make the baffle that height? And I mean the first and third baffles in the trio between the return section?

Good to know about the return placement. I had set it that way because that is what most of the pictures looked like when I was Googling it. Totally makes sense though because the skimmer will be making bubbles too. Good thing I am redoing the baffles after all :-) Also thanks for the answer to the socks. I was kindof thinking I didn't need them since most pics I have seen of those drains had no socks. The manifold you speak of should maybe look like the one impur has? That shouldn't be too hard to make

So I have come back to the hobby after being away for a few years. My last tank was a standard 48" 55 gallon, so this should prove to be a fun upgrade. I am a little rusty on some things and also there are some things that I simply do not know, so I am kind of reviewing and learning at the same time here. I have been trying to be patient and do research on everything so that I do this right from the get go. If you have suggestions or see something that I am doing that's wrong, please let me know. Ok here we go. As the title indicates, this is a Marineland 93 gallon cube 30" x 30" x 24" with corner overflow. I bought this from Jeff @ Cuttlefish and Corals and I must say that I am pretty happy with how he runs his shop. I also got the matching stand, which is on the short side at 26" from very bottom to very top, but I think it will work out OK. I painted the inside of the stand with Kilz primer similar to impur's same tank and vanz. I think this was a great thing to do because it will help keep the moisture out of the wood, thus prolonging the life of the stand eliminating the issue of mold and rotting etc (hopefully). For now, I will be using a 20 gallon long as my sump. The back of the stand is wide open, so the sump tank will stick out a couple of inches, but I am OK with that. I am going to attempt to set up the Herbie method overflow and use the existing PVC that came with the tank for the two upper pipes. Down under, I will be using straight pipes into the sump and the main drain will have a gate valve on it to be able to dial in the Herbie just right. The sump will have three sections - drain from tank, skimmer/fuge, return - and maybe down the road I can add some dosers or reactors of some kind. I already screwed up by not researching what silicone is aquarium safe, so of course as luck would have it, I siliconed my baffles today with the GE type II that is apparently a no no. I will be getting the razor blade out tomorrow to take out the baffles, scrape out the silicone, and re-install them with the GE type I silicone that is recommended. I would like to have a resivoir under there too with ATO water and pump so that I can have that going too. I will be attempting to install my new RODI unit behind my fridge too so that it is close to the tank. As some folks pointed out in another thread, I may have a drain hole in the wall there too that the waste water can maybe go down...I need to look into it to see if it is usable. So without this turning into a novel, here are some pics. I am still working on plumbing, first time doing this myself also, and currently am leak testing the tank. Here is what my sump will more or less look like. I have a Reef Octopus SRO 1000 INT skimmer that I have high hopes for. I also have an acrylic fuge box that I need to get a couple of suction cups for and then I plan to mount in the middle section with the skimmer and have chaeto in it. For the drain pipes, should I be hooking a sump sock to them even though they will be submerged due to being Herbie? Return pump. Hopefully this puts out enough juice. If not, then I need to research a suitable replacement. BAD SILICONE!!! I got the Ocean Revive T247 LED light from Jeff also. I will be getting a 10' 3/4" EMT conduit pipe and a pipe bender from Home Depot and making a light hanger like in these pics. I will then secure the hanger in two places on the back of my stand, but leave it a little loose so that I can just rotate the whole thing out of the way when I need to get my hands in the tank. So that I don't mess up my hardwood floors, I will put some type of pad under the bottom of the pole so it can rotate ok.

I will take it! Sending you a PM. Thank you to everyone for the input!

How well does that work compared to a gate valve? I am building a tank similar to vanz and going to do the Herbie overflow, so that is why I wanted the gate valve.

If only Salem wasn't far far away from Vancouver :( Thank you for the info though!

That is a good deal. If I end up getting it online, then I will probably do that one. Saw some on ebay too.

I am getting pretty frustrated with trying to find one of these dang things. Nobody carries them or claims to even have ever seen one...Home Depot, Lowe's, Ace Hardware, Ferguson, Grover...ugh! If anyone has one I can buy or knows of anywhere LOCALLY that I can get one, please let me know. Thanks!

Ok I was wondering what that was. So how do I tell where that hole drains to? Also, so if I do use it then I should just close it back up since its a drain for something else so that there is no mess?

Thanks for info on the splitter! Hmmmm ok the waste thing may be an issue. I didn't know about that. Maybe when I make water I can just have a small garbage can on wheels to have the waste go into and then pump it outside by my back door?

I am getting a 4 stage RODI system and have not had one of these before. Would it be possible to mount this behind my fridge and tap into the water line that goes to the fridge? Would that cause any pressure issues or anything? My tank is going to be a few feet away from where the fridge is and I am thinking if this can be done, then it would be super convenient.

So I got this along with some stuff I bought on CL and I do not need it. It comes with a Marineland MJ1200 pump, the manual, and a dozen or so of these black biofilter star things. I ran this for a while in a vinegar/water bath and got it as clean as I could. The black rubber ring around the skimmer cup should be replaced because it is cracking and will probably break sooner than later. Not sure what something like this is worth, but lets say $60 obo? Also willing to full/partial trade for the following: - Jager TruTemp 250w heater - Medium size Mag-Float - Small descent quality power head for my 8gal Nuvo tank - Let me know what you got and maybe I want it

GoPro traded now too. Thanks Paulv!! Closing thread

PM'd you