titus'reef

forgot to mention Everything is OBO

Do you still have the skimz dosing container? 

You don’t want a big pump for the ato. The bigger the pump the less precise it is and more likely to cause overfilling. 

Time to clear some equipment I don’t need or upgraded. Everything is very clean and lightly used or new! 
 

Brand NEW black AI Hydra 52HD-$400

2 BRS dosing pumps- $40 each

one is gone 

2 aqua lifter pumps-$20

Quite one 4000 pump. Used for a couple months - $45

Tunze 9004 protein skimmer- $85

skimz little monster skimmer rated at up to 250gal needs new DC pump- $90

20gal long used for quarantine- $15

40 gallon breeder with a baffle installed.-$30

250w metal halide ballast and retrofit reflex or with 4 radios bulbs. - $50ish

I have an aqua lifter I was just about to post for sale

pm me if interested 

That’s awesome 👏! It’s a good trend. Once you get a test of it, is hard not to get back. I was out for 4+ years too, but keeps some equipment for just in case. 

Just announce me as the winner of my 2 tickets and you don’t have to worry about the live stream. 
it’s as simple as that. Haha 

1 Member ticket for the battery backup and 1 for the Generator please

Pm sent

Careful with those super expensive fish! 

all jokes aside though! 

He’s depressed his buddies are banned from crossing into the mainland, so he is suicidal. I’m glad he didn’t choke to death! 

Every tank looks good, however we still need more options to vote.
 

Come on reefers, post something! 

6 hours ago, Cobalt said:

Love the clean look of the tank and lighting!

Thanks. It’s hard to keep it simple 😂

Red Sea Reefer 425XL 

 

What a cool idea! 
Thank you ! 
 

...

On 2/11/2021 at 10:06 AM, Brittany said:

Does this have a heater, rock, sand?

 

I can trow in some water if needed for an even better deal.  

1 free ticket for Paradise Corals please!

I know that Diamond Goby, 😂 

With the new minimalistic aquascape we do this days wish are lacking hiding places. I see that in my tank as there is not much places to hide. Good for flow and coral placement but fish struggle with it. 
 

Thanks guys.
I’ll most likely open a ticket with Neptune. 

Great looking tank 

Today I looked for any possible corrosion on all the connectors and rebooted the system again and change a few things including a brand new Ethernet cable, but things are still the same. The plugs turn off randomly as soon as I plug the Ethernet cable back in any v1/2 v3/4 slots. 

It seems the issue is worse when the lights is starting to dim. 
 

Any ideas of what to do? I could always just run the light as before but ... I like the dimming options, and I hate the idea that it doesn’t do what’s supposed to do. 

27 minutes ago, obrien.david.j said:

I personally have had ethernet cable/port issues, with hidden corrosion.  Apex suddenly wouldn't connect, or wouldn't connect after I disturbed the ethernet cable.   I was lucky enough to solve it by plugging in/out/in/out, pushing a little harder (not too hard), ....  Effectively slight tugs all over the place.

I’ll definitely check for corrosion. It is very possible it might be the case as I haven’t used the Ethernet ports in a while. 

Thank you for the quick feedback!

I have rebooted the system a few times and that didn’t help. Just checked for duplicates and I didn’t find any. I couldn’t see any corrosion on anything but I will have to look again later today to make sure. I switch the light on v1/v2 and it doesn’t act any different. 
Maybe the Ethernet cable I used is bad. I’ll replace it and and go from there. 

 
I have this blue led light over my led tank and I was just turning it on and off with my apex classic. I wanted to get fancy as I had my v3/v4 (variable speed) available and I connected it to be able to dim the lights for smooth on/off transitions. That’s done and it works, however when I plug in the Ethernet cable in the v3/v4 in my apex classic some outlets randomly and quickly turn off for less than second and than back on. I have two EB8 and I see that both strips are effected. (Hydra 32hds, skimmer, UV,  ATO Etc.) 

Does anyone have an explanation and a solution? 

The firmware is up to date on the apex classic. 

On a side note: I am dosing with the BRS dosers controlled by the outlet 4 and 8. I have a float switch that is programmed to turn off the dosers when it is closed. I noticed when the doser is programmed to dose and the switch is closed (maintenance reasons) the dosers is going through a quick on/off cycle trying to dose despite it being programmed to be off when the switch is closed. Along with the doser turning on for a second the other outlets do the same. 

I might have more issues that I am originally asking help for but maybe my explanation would help you understand the problem better. 

Thanks in advance! 

he was happy in many tank. I was the mad one.