Ryan

The light fixture is now on ebay: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=260290957559&_trksid=p3907.m32&_trkparms=tab%3DSelling If you want it, I'll still sell it for $160. Let me know, and I'll cancel the auction. I need to sell it so I can buy my tank and regulator for my calcium reactor!!!

I would also like a large frag of each. Please let me know!

Some new pics of the reactor build: (just emptied water out of it)

Well, building a skimmer might be next on my list! You can build a skimmer for cheap if you aren't worried about using nice materials. For example, you can use PVC for the main body instead of acrylic (which for 6" cost $26 per foot at Tap).

I started a new project yesterday for my tank! I really want a calcium reactor, but do not have the room under my stand so I decided to make one that will fit in the corner of my sump! Its a scaled down version of the "DJ88" Reactor seen here: http://www.melevsreef.com/dj88.html I also put the plumbing and circulation pump together yesterday! Im going to use a MJ1200 with very little plumbing since I do not have a lot of space. Water from the tank will be injected into the left side fitting, Co2 into the center, and the right side fitting will be used for the Co2 re-circulation loop. The 2 bulk heads you see on the pump/plumbing will go into the bottom holes on the reactor. Effluent will exit the reactor on the lower left hand side of the smaller chamber of the reactor. Tap Plastics will have all of the pieces cut on Monday. Its only $35 for all of the acrylic cut to size, holes drilled, & top flange cut!

(corals are all pretty closed up, the lights were off for an hour when I took these pics) This is only the 2nd time I have turned this light on. I have to admit, it almost looks as good as my MH/VHO light setup!

I currently use Reef Chili, and have got good results. I am thinking about trying Coral Frenzy and alternating it with Reef Chili to give my corals a bit of variety!

Heres some pics I took last night with just the actinics on. Everything looks pretty good except the toadstool was closing up.

Downhill, Ill try to get some better pics of it today when my lights turn on.... As for the putty showing on the stand, it shows up a lot more in the pictures then it does in person. I was not planning on the putty showing when I built the stand, I though the putty would absorb the stain more. Honestly though, like you said, it does give it kind of a rustic look which pretty good. A bowfront stand for a 72g will be much easier to build I think! The radius is much less steep then the 36g so it will be a much more gradual bend. to achieve the bend on the front of my stand, I used 2 layers of 1/4" birch plywood glued/screwed together. The rest of the stand is 1/2" birch plywood screwed to the 2x4 frame. My stand is a tank, way overbuild for just 36g....lol! I took some more pics last night with just the actinics on, let me up load them then I'll post them! Oh, Downhill, heres a slightly better pic of the SPS I was asking about:

Newest frags (pics took with phone) Purple Haze Montipor (could not get a good pic for anything, lots of light reflection) Red/white acan of some sort I think(anyone know the name?) Birds Nest SPS of some sort (anyone know the name?) It has blue tips, with green polys that come out of the tips

I really like the cube tanks! What are the dimensions of yours?

I bought this fixture when I first bought my tank but soon realized it was not going to fit in the custom canopy I was building so I had to go with a retro light setup. It is BRAND NEW, I would have sent it back to MarineDepot, but I stupidly recycled the box a few days before I realized it wasn't going to work for me. DOH! It comes with 2 24" 10,000k & 2 24" Actinic bulbs. I paid $239, I will sell it for $160. http://www.marinedepot.com/ps_ViewItem~category~30_inch_Current_USA_SunDial_T5_HO_4x24W_w__Timers___LED_30in_Units~vendor~Current_USA~SearchStr~sundial~action~view~idProduct~CU01151~idCategory~FILTFIT53U.html If anyone is interested, I will post pics of it. I can even set it on top of my tank and take pics so you can see what the light output looks like.

The rest of these pictures are the most current, but taken with my phone cause I was too lazy to get the real camera out....

Various progression pics in no particular order

First Inhabitant, peppermint shrimp First Corals

Well, I have quite a bit of live stock now...I'll post some pics. I am still trying to to get the hang of fish tank photography, so some pics may look a little strange. Some were also take with my iphone so may be a bit blurry. I'll post from the first day of start up with 60lb of live rock from the Seahorse. Day One

Thats pretty much the build of my tank. I'll post pics of it up and running tomorrow!

RO/DI & Auto Top Off Update: I installed the auto top-off today! It is hooked directly to my RO/DI fillerts auto shut off. My RO/DI unit is hard plumbed under setup under my kitchen sink. I didn't want to drill any holes in my kitchen cabinets, and my tank is only about 5' from the RO/DI unit so I did this: I used a "T" to go to the float valve in my sump, then put a stright valve in so I could still use the RO/DI unit to fill up my 30 gallon rubber made tub for mixing water. This pic shows where the 1/4" hose tucks between the cabinet and door. This pic shows where the hose goes from underneaths the cabinet to my tank stand on the left. I used "L's" to and little 3M adheisive wire holder things to hold the hose tight to the cabinet and wall. This pic shows where I hooked the drain line from the RO/DI unit into the drain of the kitchen sink. This is how I hooked the supply line for the RO/DI unit to the cold water supply for my kitchen sink.

Lighting When I took these pics I was still waiting for my MH ballast and light so the pics only show the mogul for the MH light... Not show are 2 timers. One for the Actinics (12p-10p), & one for the MH (2p-8p)

Sump & Plumbing

Stand & Canopy: :

Hello all! Im new to this site, and fairly new to salt water/reef tanks! I started building my 36 gallon March and got it running on May 17! Setup: -36 Gallon All Glass Display (drilled 1" overflow, 3/4" return) -20 Gallon All Glass Sump w/acrylic baffles -Custom stand & Canopy -4-75w 24" Actinic VHO's w/2 Workhorse 7 ballasts -1-250w Metal Halide w/Icecap Ballast -AcuaC Remora Skimmer modified to run in-sump -Rio 2500 Return pump -2-modified MJ600's on wave timer -Auto top off hooked directly to PureWaterClub RO/DI filter If I were to do it again, I would probably go with a bigger tank but at the time I didn't realize how into this hobby I would get. Its very addicting! I already have very big plans for a future tank!!!

Is your skimmer in your sump? Every time I move something around or change my filter media it stirs of a lot of debris that settled in my sump....Im sure thats what happened in your tank, and is nothing to be worried about.