vanz Posted March 14, 2008 Share Posted March 14, 2008 Is it okay to split the drain and have it go to the reactor? Or maybe split the return pump and use that line? I don't want to add another pump. If I split the drain, will the air bubbles affect the phosban at all? Quote Link to comment Share on other sites More sharing options...
H20cooled Posted March 14, 2008 Share Posted March 14, 2008 I would use the return pump to feed it, I did this with my last setup and it worked good, the thing to remember though is low flow. So you will want to put a ball valve on the feed to slow it way down. Quote Link to comment Share on other sites More sharing options...
Nyles Posted March 14, 2008 Share Posted March 14, 2008 Agreed with that, much safer in the long term Quote Link to comment Share on other sites More sharing options...
vanz Posted March 14, 2008 Author Share Posted March 14, 2008 Okay, sounds good to me. I need to reconfigure my piping and split it off with a ball valve. Quote Link to comment Share on other sites More sharing options...
WAVES Posted March 15, 2008 Share Posted March 15, 2008 bubbles wont matter, but I would think it would collect alot of detritus too if you did it on the drain VS pump. I agree with these guys, thats how I have mine at home too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.