Jump to content

Clearing out Aquarium Stuff!! Make me an offer!


Recommended Posts

I am clearing out what I don't need/use, mostly because I do not have the room. Make me a reasonable offer on all the items, cash works best, but might be interested in a trade for some LR or possibly something else, who knows.


First off, I have a bunch of LaMotte test kits. They are way over what I need for my tank, and I just do not use them.


First (picture 2) LaMotte Salt Water pH Test Kit , Model AG-23

Less than 1/4 use, still plenty of life left. All instructions, bottles, tubes, etc included.


Second (picture 3) LaMotte Phosphate Test Kit Model PAL

Over half full, all instructions, bottles, tubes, etc included.


Third (picture 4) LaMotte Calcium Hardness Test Kit for Fresh and Salt Water

3/4 Full, (the missing bottle I believe was just another Sodium Hydroxide Reagent, of which one is already included)


Fourth (picture 5) LaMotte Alkalinity Test Kit Model WAT-DR

Bottle of alkalinity titration reagent B is almost all the way full. BCG-MR tablets are almost full also.


Fifth (picture 6) LaMotte Salt Water Aquaculture Test Kit Model AQ.5

Everything is over 3/4 full, and all instructions and everything included. Tests Ammonia Nitrogen, Nitrite Nitrogen, Nitrate Nitrogen, Alkalinity, Carbon Dioxide.


Other items:

Pinpoint PH Monitor, made by American Marine Inc. Pretty self-explanatory, has working batteries in it. Make me an offer. (picture 7)


Wet/Dry trickle filter/sump. Measures 2' wide (not including bulkhead, add another 2") 1' deep, and 16 1/2" tall (not including pipe fitting, add 4-5"). I also have a bunch of bio-balls I will throw in with this.


250 W Metal Halide Lighting system. Has 1 250W Halide (bulb is 1 week old) and 2 actinic bulbs (1 bulb is smaller than the other, I do not know too much about actinics other than that they are both about the same color blue, and are beautiful! There is a Ballast for the Halide, and a separate ballast for the actinics. I will also include 2 used Halide bulbs with about 3-4 months left on them. The unit measures 30" long, 13" deep, and 6 1/2" tall. Has a fan built into the unit. I will also include a sheet of plexi cut to fit on the bottom of the unit, to protect the bulbs.


Emperor 400 Bio Wheel filter. Needs a good clean, and new wheels, but other than that it is good to go!


Small Refugium light, nothing fancy, but gets the job done!


Small tank light, made by JBJ, has 2 10,000k Sealife 65w bulbs. Built in dual fan system, with a switch for each light, and for the fans. It is 24" wide, 8" deep, and 3 1/2" tall.


46 Gal bowfront tank, stand, hood (all black). Have some other accessories to go with it also, make me an offer.


Small protein skimmer, nothing fancy, but works.


I have not attached pictures of everything. If you would like to see a picture of something let me know and I can get one. I am located in Salem, but could possibly make a trip to portland if enough stuff is going up that way. Thanks


The other pictures will be attached below...






Link to comment
Share on other sites

I believe the water level would be the same on both levels, as in it would not be any higher in the bio-ball chamber than the water is on the other side, if that makes any sense. It could be converted to hold a sock very easily, and I think then it would be possible to fit a skimmer inside of it. Let me know if you want to come have a look at it. Thanks




Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...