fishboys Posted May 30, 2016 Share Posted May 30, 2016 (edited) So I have a new to me calcium reactor. It needs a gasket where the main lid attaches on the top of the unit. Was wondering if anyone has an extra or a broken down unit that might still have a viable gasket in it. I also was wondering if anyone has a part number or an exploded view of the unit. It is an older model that is no longer produced. It is a precision marine unit I belive it to be a 622. If someone knows where I can find the model number on it that would also be helpful. Thank you for any and all help on this matter. Troy Edited May 30, 2016 by fishboys Quote Link to comment Share on other sites More sharing options...
Higher Thinking Posted May 31, 2016 Share Posted May 31, 2016 (edited) Depending on the size you need, most hardware stories stores sell various gaskets. You can likely buy a generic one and place that between the base and lid and it should work just fine. Edited May 31, 2016 by Higher Thinking Quote Link to comment Share on other sites More sharing options...
The ReefBox Posted May 31, 2016 Share Posted May 31, 2016 Some stores in PDX carries bulk Oring material and you can cut and superglue ends. Used to do it all the time on heads for jet skis Quote Link to comment Share on other sites More sharing options...
Mandinga Posted May 31, 2016 Share Posted May 31, 2016 (edited) I have found an Ace hardware in tualatin carry these...but many hardware stores will turn their head about 45 degrees and their face and eyes will gloss with confusion. Edited May 31, 2016 by Mandinga 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.