jtarmitage

Low use, like new condition

Bump. OBO

2 kessil A160WE’s. Perfect condition in box. $120/each

I’ve got this single bulb reflector and ballast in one of my equipment bins  a bit dusty but in great shape

$200 obo

36” x 24” x 8.5”

pristine condition. Has a corner overflow box but is not drilled. It can be drilled but I used a fluidized filter in the corner and chose not to drill it yet. 
 

Looking for a sump for a new project and curious what may be available locally.  Sooooo, what ya got?

This will be for a 90g tank, absolute max size 34"x19" but I'll also need to figure out space for other support items.

I've got a pair of yellows, a red sea sailfin, and a Naso from a large tank that I'm getting ready to break down.  Not sure on pricing though...all healthy and have been in my tank for the last 18 months  to 2 years or so.  Say $200 each OBO.

Short answer, internal is only good for pumping from 1 container to the other, and pump is more difficult to clean. An external pump can be set up for transferring to the 2nd container, mixing the salt water, and transferring mixed water to the tank. Con of external is more intricate plumbing and more points of failure. 

PM sent

If you make it down to the Portland area, I have quite a few zoas available.  Can put a package together as I need to unload my frag tanks.  PM me if interested.  I'm over in SE Portland near the Clackamas Town Center.

Grover electric and plumbing supply in Vancouver has some as well. 

Don’t think you can get that kind of extension unless in a low flow tank but that is very cool

I’ve got a bunch of colonies of weeping willow. Polyp extension runs about 2" or so in my system though, not the 3-4" you’re talking about. 

I’d take 10 if it works out

It could be. You don't need anything on a ceramic shift, and it could be trapping air and not letting it get spinning. The Vaseline will actually hinder it from spinning. 

Count me in

it's essentially mold/bacteria.  I'd dump it and start fresh.

23 minutes ago, SuncrestReef said:

Unfortunately our forum software doesn't allow any easy way to look up your own membership expiration, but I believe it will send you a renewal notice when it's about to expire.

Using my Admin console access, I looked up your membership and see it's good through November 27, 2022.

If anyone else would like to know their expiration date, you can send me a PM.

Yeah, I checked my paypal history to figure it out lol...

Do we get any form of notification when our membership expires, or is it auto billed?  I know I've got a few months left but just curious.

I know Rudy had a bunch of small red carpets when we were over there this last Sunday.  https://goldenbasketreef.com/

14 minutes ago, Abarger16 said:

When drilling dryrock do you use masonry bits or standard bits ?

Either can work. The masonry bits just work better and last a lot longer. Regular bits will get dull very quickly

In the lighting section by the fluorescent lighting

I'm still a fan of the plenum system popularized by Jaubert.  I've run it remote in the fuge for more than 20 years. 

I remember the days of upgrading to MH/VHO's from PC's, and airstone driven skimmers to an AquaC venturi skimmer....Those were the days of low tech, so didn't have much else that was notable save the use of mechanical timers and the upgrade to controllable pumps...