ReefNoobie

Sounds good, eager to hear back!

Sent from my XT1080 using Tapatalk

Pm sent

Sent from my XT1080 using Tapatalk

6 bulb Tec Elite good working order, may need new bulbs (unsure) $50.00 (Used on a 40B)

 

Marineland 37 gal tank, needs a mild cleaning. $20.00

Sent from my XT1080 using Tapatalk

Keep me posted!

Sent from my XT1080 using Tapatalk

$150 takes all, obo

Sent from my XT1080 using Tapatalk

$175 takes all

Sent from my XT1080 using Tapatalk

I have a 250w MH ballast dual plug, two bulbs both 14-15k (not sure exactly, light blue) and two small (BRIGHT) blue led moon lights as well. Will sell all for reasonable price. If interested let me know, will post pics tomorrow. I just bought LED's so have no need for any of it anymore. Thanks for reading!

Sent from my XT1080 using Tapatalk

Wanting to sell K2R Calcium Reactor and everything needed to set it up. Comes with CO2 tank, Reactor, pump, solenoid, etc... Will post pics tomorrow, if your interested let me know! Any questions feel free to ask!

Sent from my XT1080 using Tapatalk

I'm looking to buy a leftover tank anybody has laying around, hoping for a 40 breeder, but just looking for a long tank and somewhat deep, have to get a new skimmer and hoping not to have to put it inside of it, recommendations welcome, I want the largest refugium I can build, hoping for around 36-42-ish inches long, need room to put ATO housed inside enclosure as well. Thanks for reading!!!

Sent from my XT1080 using Tapatalk

Purchased the reefcorner CR180P. and am loving it! It has a slight red shimmer but I think it's because I have it too close to the water, but if anybody is looking to buy, they are awesome!!!!

Sent from my XT1080 using Tapatalk

I have a used one I will sell u for cheap. Comes with CO2 tank, pump, regulator, everything u need, just hooked it up last week to make sure it still worked, pm me if your interested.

Sent from my XT1080 using Tapatalk

One other question, is the drain/overflow loud when it drains because it doesn't have full syphon? Hoping for silence, but everybody does, right? Just trying to plan this out the best I can!

Sent from my XT1080 using Tapatalk

Ya, that is the same reason I made an emergency overflow between sump and DT, I can now sleep at night. I was literally waking up randomly in the middle of the night to check and see if it was flooded, and racing home just in case something was "just about to happen" now I can sleep and the tank is doing great!!!!! Still a noob, but I'm getting there!!!

Sent from my XT1080 using Tapatalk

Nice! I will make that work than, looks like a healthy setup!!! I appreciate the pics!

Sent from my XT1080 using Tapatalk

OK, than I won't do it and I'll figure out a way to gravity feed it, can I use clear tubing for the gravity feed?

Sent from my XT1080 using Tapatalk

So will it work even if they are at the same height, I can raise it to where its a "little" above it but I don't want to have to raise the heck out of it, ya know what I mean?

Sent from my XT1080 using Tapatalk

Is there no way to be able to do it with the sump and fuge being at same height? That is my ultimate goal.

Sent from my XT1080 using Tapatalk

Also, I don't care about having to buy and overflow box, I'm trying to do everything j can to conserve pace so my refugium can be as large as possible. The skimmer will still be I. The original sump, refugium is going to be as dedicated to just a refugium as possible. Thanks again!

Sent from my XT1080 using Tapatalk

If you could explain in more detail how this would be done. And I have not yet acquired the 40g breeder for this, I'll there be one side that will for sure not be tempered glass so it can be drilled successfully? I have never drilled into glass and am nervous about that. But again if you can let me know exactly how this would push and pull water with the use of whatever pump, please I am very curious. Don't forget I'm a noob so I'm new but learn from reading and talking in a daily basis from educated people like yourself! Thanks again for all your input!!!

Sent from my XT1080 using Tapatalk

No, was going to use a submersible pump for return and same for flow going in, that's where the question comes in. I am open to suggestions but they will both be at same height so don't know how that will work

Sent from my XT1080 using Tapatalk

I'll take some pics when I get home but the worry is the exact flow back into the sump, because an overflow is not going to be used

Sent from my XT1080 using Tapatalk

I have two holes in my sump already for my loop to and from tank, didn't want to have to replumb anything cuz I have external pumps. Look and my post "already addicted noob" and u can see what I'm working with, its changed a little since than but not much.

Sent from my XT1080 using Tapatalk

I am building a 40g refugium for my 65g reef, and was hoping to get some help. I'm sure this is going to be an easy one for you veterans!

I am wanting to pull water from my sump and push it into my new refugium (will be next to tank in separate enclosure) and back into sump once it reaches the end. How will I be able to have a consistent flow pulling from sump and pushing back into sump. The part I'm stumped on is making the flow from and to sump match exactly so I will not have any issues with overflow. I will be getting another auto top off and modifying it to work for this exact reason but is there a way to do this without using a top off as an emergency overflow.

What I mean by using a top off is putting a top off inside of my refugium and put pump inside sump, put the float inside refugium so if it were to ever get up to the float it will cut off the power to the pump that is enabling it to pump from sump into refugium.

Is there a valve (like a gate valve we use on main tank) for 1" flexible tubing to limit flow, or is there a way to make it match exactly? Will two of the same pumps work? The part I don't understand is if the head on each pump is different.

Please any suggestions would be greatly appreciated!!!! Thanks for your help and for reading my post!!!

Sent from my XT1080 using Tapatalk

Definitely will look into those as well. Will need one for other tank as well. Just figured I would check this one out especially for the price. Again, any and all feedback is very much appreciated!

Sent from my XT1080 using Tapatalk

Definitely getting the dual! I just ordered it and I have heard only ONE bad story about it and it came down to him not spending a little more money for the dual in case one fails! Other than that it has been great reviews!!!

Sent from my XT1080 using Tapatalk