shaywood

This coral is outgrowing the frag rack.  $40 and it's yours.  Please take a look at my site for more info.

Tubs Stellata Montipora Coral – Little Maui

They already sold

I have one on Tualatin you can borrow. 

Thanks. Replied via email.

Yes.  Usually they pick a spot to hide under some rock and stretch out at night to sift through adjacent substrate.  If healthy, they will also split.

The nice thing about Tiger Tail Cucumbers is that they're great cleaners and they split.  For sale is this cucumber ready to start helping keep the tank substrate clean.  Local pick up in Tualatin.  Purchase online to hold.  

Tiger Tail Cucumber – Little Maui

Cheato factory is full. Free cheato ready to go. 

These corals are out growing their frag rack.  Priced right. The Tubbs is getting huge. Local pick up only in Tualatin. 
Purchase online to hold item. 

Yellow Cup Coral Turbinaria Frag – Little Maui $40

Tubs Stellata Montipora Coral – Little Maui $45

Power supply went out for my Hydra HD Twenty Six.  If you happen to have an extra, send me a PM with price. 

If anyone is going to be in Tualatin, I can put the energy bar on the porch and it's yours. Let me know when.

Just an FYI - your Apex may not be displaying data correctly in APEX Fusion following this morning time change.  

Find more info here:  Help! Fusion display glitch: No data after 2am DST Start (neptunesystems.com)

Twice today the power to outlets on one of my energy bars lost power and went to zero watts turning off most, if not all, devices connected to that bar. Each time the power restored quickly. This bar had been repaired by Neptune two years ago. I seem to recall someone local who collects them for later repair. Anyone know who that is?

I use this particular sensor with Home Assistant. 

I used to question the reading, but would take it into the office and close the door while working. The reading would go up to 1000, so I know it works. 

I use a MH-Z19 NDIR CO2 Sensor. 

Interestingly, We have a CO 2 meter that rarely goes above 400. 

Having problems with the pump on my skimmer so it was off a couple days.  What a difference the skimmer and co2 scrubber make!

THank you.  I did a reboot and tested the temp and pH, both are now working.  I also you Home Assistant, so I'll be sure to setup some redundant alerts. 

Hello. Thanks for the reply.  My EmailAlm is set to Auto.  I think below is what you are requesting.  I see no reference to the pH.  If I need to include it here, why are there options to toggle alarm settings in the Inputs screen?

@svt_guido Send me a PM and we can arrange a time of Wednesday. 

Thanks for checking.  The pH was below the set point for several hours.  It's odd there's nothing in the alarm log. I just rebooted the APEX and got an a separate alert about a pump being off. Weird. Maybe it's just related to pH.

Tons of cheato. Free porch pickup in Tualatin. 

I'm sure it's something I'm doing!

I had to take my skimmer off line for a couple of days, which is used to increase pH with a Soda Lime air scrubber. My pH dropped below 7.70, but I didn't get an alert or any record in my alarm log.  I'm including below screenshots of my settings.  Where should I check?

Inputs screen:

pH probe configuration:

Alarm log for yesterday.  The reading dropped by 7.70 at 11:20pm and was much of the day today.

Sounds great,  but I'm not sure Vaseline is my pump problem. 

Always thought that would help lubricate things. 

Hello all, time for some professional assistance    I have a Bubble Magus Curve 7 Skimmer with a 4-year-old SP2000 pump.  I realized today that the intake was clogged with cheato for a few days. I removed the skimmer/pump and gave them a good citric acid wash.  When assembling the pump I used some Vaseline to lubricate the rotor and ceramic shaft. When I put the pump/skimmer back in the sump and turned it on it wouldn't prime and start pushing water. I removed and tried it in the kitchen sink with similar results.  Eventually, I got to work and its pushing water great and silent. When I reinstalled in the sump, it did the same thing again.  I had to turn the pump on its side and raise and lower it to get it going - then assemble the skimmer in the sump.  Thinking it might be the rotor, I also tried a new rotor, but same problem.

What do you think? Maybe the inside of the pump housing isn't round anymore? It looks round.