CrabbyCrabs Posted July 17, 2019 Share Posted July 17, 2019 I'm sure this has been asked and answered. I moved/am moving to Idaho. The city water comes from a well field. My spectrapure 180gpd 5 stage unit says it's running roughly 100ppm into the ro. I'm getting 0 ppm out, before di. I have the booster pump too, from BRS, but it takes tap pressure that's 45psi and boosts it to only 60. Seems low. Now, spectrapure says to test co2 before using di resin, I did with their kit but the sample remains clear after adding 150 plus drops. I assume high co2. Is anyone else on well and have issues with co2? Best way to deal with it? Quote Link to comment Share on other sites More sharing options...
SantaMonica Posted July 20, 2019 Share Posted July 20, 2019 Could always just let any CO2 off-gas in an open barrel for a day or so with a pump to circulate it. Quote Link to comment Share on other sites More sharing options...
CrabbyCrabs Posted July 21, 2019 Author Share Posted July 21, 2019 How do I pump it through the di cartridges slow enough to have dwell time? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.