J & Jr Posted February 19, 2007 Share Posted February 19, 2007 I know I have read someware in this fourm about some rubber gromits that you can use to seal around PVC instead of a bulkhead fitting. I am looking for something to use inside my sump so I am not all that concerned about leaks but would like if it didn't. I can't remimber what they were called or if they are to be found in the portland area. if any of this makes sense and you know whare I might find them i would thank you. Quote Link to comment Share on other sites More sharing options...
CCR Posted February 19, 2007 Share Posted February 19, 2007 uni-seals order on line. don't think there in portland, but could be wrong http://aquaticeco.resultspage.com/search?w=uni-seals Quote Link to comment Share on other sites More sharing options...
J & Jr Posted February 19, 2007 Author Share Posted February 19, 2007 Thanks CCR for the name, I could'nt get the linc to work but at least I know what I'm looking for. Any one know who might have them in the area? Quote Link to comment Share on other sites More sharing options...
CCR Posted February 19, 2007 Share Posted February 19, 2007 Thanks CCR for the name, I could'nt get the linc to work but at least I know what I'm looking for. Any one know who might have them in the area? Try link again, I had to change it a coupe times to work. I know there are other placed, do a search. Good luck.... Would be nice to have a supplier local Quote Link to comment Share on other sites More sharing options...
R-3 Posted February 19, 2007 Share Posted February 19, 2007 I thought Joel had some awhile back. I could be wrong. Later Ryan Quote Link to comment Share on other sites More sharing options...
oldbrownies Posted February 20, 2007 Share Posted February 20, 2007 what size do you need? I have a few extra that I wont be needing for my Kalk reactors Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.