BradB

System = four growing tanks and one sump. This system is ideal for the serious reef hobbyist that wants to have plenty of specimens to trade with others or someone that is seeking to grow corals for wholesale and/or retail customers. It provides significant water volume (460 gallons) for water quality stability while at the same time minimizing the footprint of space required if the tanks are stacked. Propagation Tanks The tanks are constructed to 3/8” – 1” acrylic and designed for maximum light penetration. Two of the tanks have completely open tops (euro-brace design). The variety of heights provides tremendous flexibility for organizing frags and colonies to meet each coral’s optimum growing conditions. Propagation Tank Dimensions: 2 @ 2’W x 4’L x 14”H, approx 70 gal and constructed of 3/8” acrylic w/ 6” brace across the top for stability 1 @ 2’W x 4’L x 12”H, approx 60 gal and constructed of 1” acrylic w/ open top 1 @ 2’W x 4’L x 16”H, approx 80 gal and constructed of ¾” – 1” acrylic w/ open top Sump The sump is three chambered and designed to remove micro bubbles from entering the system. The sump is constructed of sturdy ½” acrylic. Sump Dimensions: 2’W x 6’L x 2’H (180 gal) Only $500 You may email me at bennettis1@comcast.net

Sold This is a silver 8 bulb Tek light hood about 1 year old. Comes with several extra bulbs in a variety of temps. Motivated seller $150. Bethany Area, sorry but I will not ship, buyer must pick up. You may email me at bennettis1@comcast.net Brad

This show tank is constructed of 1” acrylic with a “euro-brace” design (i.e. top unobstructed and free of reinforcement cross braces). The thickness and insulating properties of this tank make it ideal for a “cold water” system. The maple stand and hood were custom built by F&C Cabinetry and would be a stunning furniture addition to any home. Both the stand and hood have doors on all sides to allow easy access to equipment, controllers, lighting, etc. I designed stand to allow for a 30 gallon black acrylic reservoir at tank level for gravity fed top off water so that you have a few day’s worth of make up from evaporation. The stand measures 39” tall bringing the tank up to an easy viewing height so that you don’t have to stoop down in order to see what’s going on at the bottom or in the gravel bed when you are looking for that entertaining gobi/pistol shrimp couple or hermit crab. I am also including both volumes of The Reef Aquarium by Sprung and Delbeek considered by many to be the “bible” for home reef keeping. These books retail for nearly $200 by themselves. I will also include a 30 gal sump, high end skimmer (your choice of a Euro Reef or recirculation skimmer), an Aqua Logic ½ hp chiller, some Sea swirls and a couple of Iwaki pumps for FREE!!! Tank Dimensions = 2’W x 2’H x 5’ L, 150 gal constructed of 1” acrylic w/open top Reservoir Dimensions = 2’W x 2’H x 1’L Base Stand Dimensions = 2’W x 39”H x 6’ L Hood Dimensions = 2’W x 15”H x 6’L Overall Height of tank, stand and hood will be approximately 6’3” This is an incredible bargain @ $2,500 You may email me at bennettis1@comcast.net and I will gladly email you a picture of the tank stand and hood.

System = four growing tanks and one sump. This system is ideal for the serious reef hobbyist that wants to have plenty of specimens to trade with others or someone that is seeking to grow corals for wholesale and/or retail customers. It provides significant water volume (460 gallons) for water quality stability while at the same time minimizing the “footprint” of space required if the tanks are “stacked”. Propagation Tanks The tanks are constructed to 3/8” – 1” acrylic and designed for maximum light penetration. Two of the tanks have completely open tops (euro-brace design). The variety of heights provides tremendous flexibility for organizing frags and colonies to meet each coral’s optimum growing conditions. Propagation Tank Dimensions: 2 @ 2’W x 4’L x 14”H, approx 70 gal and constructed of 3/8” acrylic w/ 6” brace across the top for stability 1 @ 2’W x 4’L x 12”H, approx 60 gal and constructed of 1” acrylic w/ open top 1 @ 2’W x 4’L x 16”H, approx 80 gal and constructed of ¾” – 1” acrylic w/ open top Sump The sump is three chambered and designed to remove micro bubbles from entering the system. The sump is constructed of sturdy ½” acrylic. Sump Dimensions: 2’W x 6’L x 2’H (180 gal) An incredible value @ $1,500 You may email me at bennettis1@comcast.net