wanareef

You might have to do this

or this

to get this

Sometimes if you just stuff a air line down the middle and keep going until it stops is another way to silence it somewhat

What you did by adding all those extra pcs changed the orginal design

you want to keep it simple.

It's not hard to load them up.  Get a photobucket acct,load them up and then click on the one you want to load, you will have 1/4 choices on the right, click on "img" and then just paste 

URL=http:// s48.photobucket com/user/wanareef/ media/ Clipboard02.jpg.html  

This url becomes this pic below

So I have a question for everyone and maybe I just need to test with a different kit but I've been using the red Sea kit to watch my cycle on my rock a few weeks ago ammonia dropped to 0 and nitrite has been off the chart since. I feel like it should have dropped at least some now I'm guessing 3 weeks with no drop. Any ideas?

Do a big WC, then test again in a couple of days.  Helps to mark off on a calendar - my memory is not the same as it use to be

Must be the welding fumes getting to you.   Reactor - diy one at that

Left a msg

Looking to have an ATO Reservoir built nothing too fancy but similar to Trigger Systems box that holds 5 Gallons like here

 

The major difference I'm looking for is a hole drilled towards the bottom to allow for a float switch that I can hook up to my break out box to alert me when the water is low. I don't have the equipment or bits to drill acrylic hence why i don't just order that one. If there's anyone out there that can do some good acrylics let me know

You don't need anything special just a drill and the right size bit, just go slow.  I would not put a float switch that low and drill thru, just in case of leaks (especially if there's a hole under the water line).  They make optical sensors you could try.  Float switches wires are not to be submerged anyway.

Used,working great, comes as pictured, use std controller or use the Apex cable (see pix)  $45

Answered your PM

Depending on your bracing you might not be able to get  72" of overflow into the tank (probably more like 70"-71" with inside measurement) and it'll be 60" or even 48" that you can snake in past the bracing.  

You would be better to install an internal overflow for surface skimming rather than an external one, or add something  like the "ghost" type overflow, diy 2 boxes but all your really need is one.  

Your box is full,still available?

Yes EB8 ,didn't need it then.  

Looking for a MB8, new, near new still working LMK what you have

Sry about the dirty glass, this one is about the size of a Susan "B"

north  portland

Y G Mail

Just gonna raise a few batches Charles...

 

Come by in a few months, I have a pair with your name on them????

Kool, I won't even hold out for designer clowns     

Jon, got your hands full now- there's lots of room down there in your basement for  "Chewie's Clown Shop" 

This definitely works, I have used this method a few times.

 

Tip:

 

If the pipe is 1.25" or bigger, just heat the inner pipe with the torch and roll it out with the needle nose.  

 

Works great, no hole saw required!

I like this approach better, hate to ruin a hole saw with a torch

Just stay with the flow thru, easier.  The other way you would have to split your overflow to two different corners then return in the middle, I have built both but the flow thru is the simplest and for the baffle after the fuge you can put teeth in it to hold back the macro      

K.I.S.S. 

Thanks for that, I'll try it. Had some sponge growing on the main float and didn't catch it.  Had a 50gal flood, again,  with the ATO pumping in fresh water.

Fallback OFF 
Set OFF 
If Sw1 CLOSED Then ON 
If Sw2 OPEN Then OFF 
Defer 002:00 Then ON 
Min Time 010:00 Then OFF 

this is my current prog on my Apex, sw1 is a std float switch,  sw2 the float is turned upside down

For you program guru's I want to add a line to turn it off "Period" after 10 mins of running because this line is not working "Min Time 010:00 Then OFF"

TIA

 

Those millis look really nice and # 67

WTB/TT for  1 1/4"  UniSeal will need 2 LMK 

DIY  Couple of these skimmers or one bigger one

(2) 1 pound BRS gfo packages. One unused, the other 90% full. $20 for both. 
(1) 4.5 pound package of BRS kalkwasser. Unused. Free with purchase. 
(1) 3.65L marineland activated carbon. About 40% left. Free with putchase. 
Package deal of random food products. (1) garlic power 50% left. (1) cyclopeeze 75% left. (1) selcon unused. (1) coral frenzy. All for $10.

Take paypal? 

If Woodie is still around, he has some , gl

Ok i had some points i used up at local shop got some more Coral Booster this is 64.99 500 ml and brightwell Marine Snow8.99 Both of these are not open I will sell both together as a deal for  40.00 cash

 

 

Also have 3 brand new boxers of Alkalinity Reagents  6.99 each

 

each box 4 bucks each these are the tested ones and good to go no opened just got all this today

 

 

Located in Wilsonville PM me

Are these for the Hanna colorimeter?