Jump to content



Recommended Posts

Polycarbonate sump. Manufacturer information now known. No leaks. I had this setup partially as a refugium. It could be used as a sump only. Designed to hold 6" filter socks. Has 3 spots for probes. Previously housed pH, Conductivity/Salinity, and temperature probe for an APEX. There are other probe locations available near filter sock.  I used a Reef Octopus but imagine it will seats any protein skimmer well.

Based on general water heights from past use I believe it's roughly 15-18 gallons. Dimensions are HxLxW= 16"x30"x12". With the flow I had setup the water height for the return compartment was 6.5". The main compartment has a length of 19.5" with a water height of 8.5". System was used for a 93 gaL system. 

Photos are right after remove. Since has been cleaned and is collecting dust in my garage. Asking $80. I live in Corvallis. 








Link to comment
Share on other sites

  • 3 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...