Cor4eyh Posted November 4, 2015 Share Posted November 4, 2015 I recently broke my sump it's cracked major. Does anyone have a sump about 18x31 or there abouts I could always go smaller. I know petco has $1 gallon sell but I can't cut glass for the sections. Unless you can cut glass Sent from my SM-N910V using Tapatalk Quote Link to comment Share on other sites More sharing options...
wanareef Posted November 4, 2015 Share Posted November 4, 2015 Just use acrylic for the baffles and use a thick bead of silicone on both sides (if possible) Quote Link to comment Share on other sites More sharing options...
Cor4eyh Posted November 4, 2015 Author Share Posted November 4, 2015 Suggestions on cutting acrylic? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
merritt180 Posted November 4, 2015 Share Posted November 4, 2015 Any glass shop will cute to size for cheap Quote Link to comment Share on other sites More sharing options...
wanareef Posted November 4, 2015 Share Posted November 4, 2015 If you have a saw table saw would be the best way and a plywood blade with lots of teeth. You'll still get a crappy cut line, jagged somewhat but it'll be cut, or you could score it like glass, place a straight edge on the line and run a sharp blade (box cutter) over it several time, move over to the edge of the table, line the score up near the edge and push the free edge down in a sharp quick motion, if you scored it enough it should break clean just touch up with sand paper hth Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.