markvo Posted February 20, 2012 Share Posted February 20, 2012 What size tubing do I use to connect to a MaxiJet 1200 output? I will be using it to supply water to my calcium reactor. -Mark Link to comment Share on other sites More sharing options...
MVPaquatics Posted February 20, 2012 Share Posted February 20, 2012 I believe 3/8". Might be a squeeze. 1/2 inch works but needs a clamp Link to comment Share on other sites More sharing options...
MVPaquatics Posted February 20, 2012 Share Posted February 20, 2012 Another thing i have seen is people hook up the airline or ridgid airline to the output that has a venturi on it. Then you just have to plug the main output nozzle and the flow goes through the venturi nozzle. Link to comment Share on other sites More sharing options...
pledosophy Posted February 20, 2012 Share Posted February 20, 2012 I use 3/8's with a zip tie. The venturi attachment requires a different size hose, which I believe is 1/2" Been a long time since I messed with my MJ's, just fantastic pumps. Link to comment Share on other sites More sharing options...
markvo Posted February 20, 2012 Author Share Posted February 20, 2012 Thanks everyone. I thought that I might need to get some metric sized hose as the one I have is slightly loose. I think I'll just clamp it down. I originally was going to use 1/4" off the venturi piece, but didn't have a convenient plug for the main outlet. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.