-
Posts
1,321 -
Joined
-
Last visited
-
Days Won
43
Content Type
Profiles
Forums
Events
Store
Posts posted by Manny Tavan
-
-
After 2000 grit you use the novice 3/2/1
- 1
-
Deep scratches? If so I would start 400 for those. Then 800 1000 2000
-
You have to wet sand if there are scratches. Polish alone won’t take scratches out
- 3
-
sold
-
Pending
-
-
[language filter] that sucks big time. Don’t ato stop when they've been on too long? I think my tunze has that fail safe.
-
You’re not using the generator to power your home gas furnace? During the outage I set my furnace to 72 to get some heat in the house. The tank heaters don’t have to do that much work after that. It’s a lot easier for the generator to power a 300 watt furnace blower than several 200-300 watt tank heaters
- 1
-
3 hours ago, Webbed Feet said:
Glad you have what for a setup? Lacking any details as to how that was done electrically, doing what you described is very dangerous. I hope you just overlooked letting us know a few very important details about what all goes into hooking up to your home that way. I am very glad no life was lost, and I am including your reef pets!
You’re right. No one should do what I do without knowing what to do and how to do it safely.
- 1
-
I was without power for almost 24 hours. Used my champion 8750 watt inverter generator back fed into the dryer plug (safely). Ran my two tanks without light. The home furnace. The fridge. All the lights in the house. Ended up using about 10 gallon of gas in 24 hours.
- 1
-
-
-
-
Sorry I was gone all week but I’m back. The most fair way at this point is to contact those who replied first and then go down the list. I’ll get in touch with you when it’s your turn
greg 123 is first
- 2
-
Didn’t think there would be this much interest.
I will take individual pictures of the dragon souls and post them here on Sunday and then go from there.
for the gold hammer. There are two different colonies. A highlighter yellow and a pale orange
-
-
-
Pending
-
-
Got one left
-
What’s wrong with it. I can repair it if it’s the psu that fried itself
-
4 hours ago, Haddibabby said:
Hello do you still have 1 pack available?
Yes
- 1
-
-
Sent you a pm
Polishing Plexiglass
in General Discussion
Posted
Now technically you could leave the inside alone after 2000 grit. Because of the water, you won’t get additional clarity from doing novas. I would only do novus to the outside