Fisher15

I have a clownfish rearing set up that I am shutting down. Mated pairs and laying pairs plus 20 gal tanks. I am looking to re-home them.

I have a clownfish rearing set up that I am shutting down. Mated pairs and laying pairs plus 20 gal tanks. I am looking to re-home them.

I have been fooling around with raising clownfish off and on since 1990. About 5 years ago I bought a home and decided to raise clownfish again. This time I was determined to make it more successful and with a lot less work. I have attached a write up of what I am doing because it may be helpful for others interested in occasionally raising clown. Larval project.pdf

I have been printing on a printer I designed and built from scratch. I used to teach engineering and used 3d software. Now I model and develop for myself as a hobby. I have done some overflow screens and such, but most of what I do is for drones and planes.

Bad test kit?

I was looking at the forum both yesterday and today, and only about 3 posts we NOT from the Golden basket. Maybe they should have a site of their own or at least a subforum for selling.

A ground probe may kill you!

I am a retired Corp COO with two engineering degrees. I also have a Masters of Education and taught high school engineering and Computer Science . Currently my time is divided between remodeling my home, raising clownfish, building drones and running my 3d printer.

I am also very cheap and have developed a way to reuse toilet paper. Just trim off the clean parts and stick it back on the roll!

I own a 135 gal glass tank, with a plywood cabinet, 50 gal baffled sump, and both T8 and Halide lights with extra bulbs for both. Also included is a nearly new chiller, that has been in a box for the last 10 years. Also, misc. food. The problem is that nobody wants to drive to The Dalles to pick it up. Its all free! I have advertised it twice and it gets lots of attention until they realize its The Dalles. So I will hold it until the first weekend in October, then haul it to the dump.

2000 watts at 120 volts requires just under 17 amps. So go with 20 amp wire or #12. I would wire it with house wire and box both ends.

I raise clowns and have never had one jump. Doesn't mean they don't, but I would guess it was the wrasse. My clowns tend to stay on the bottom or near it.

I by mine off of Amazon Prime. I get them in 2 days.

Is there an objective for the guest speakers? Are they just entertainment? What knowledge are we trying to improve?

The movie sucked!

Float valve in the sump!

I use a large ATS for my brood stock system because I feed so heavily. It has leds on both sides of the 8" x 12" screen. It is housed in a light prof cabinet hanging on my fishroom wall. I run the ATS on a reverse light cycle and didn't want the lighting to bother either the brood stock or larva.

You mean to say that government regulations were holding back development for no good reason???? I am really surprised!

I live East of Gresham in the Gorge.

My experience with old acrylic has been bad. It warps and doesn't glue as well as new material. I originally built multiple tanks from acrylic, but two years ago I set up a fish room with glass tanks. I scrapped the old acrylic ones and cut them up for material just like you intend. I built my first ATS out of this reclaimed material. One day while cleaning it out, It exploded and one vertical seam just split. I have been told it was built up stress, but in any case I threw the rest away. My ATS is now glass.

I haven't used mine in months. It was a poor solution. You can only kill those you can see, so they come right back.

I would recommend an algae scrubber.

What about a topic on Algae Scrubbers? My write in vote!

I missed it.

Can you show me the data for the 97% claim? Does science require a consensus or data?