Jump to content

57buick

Members
  • Posts

    19
  • Joined

  • Last visited

core_pfieldgroups_99

  • Location
    Salem, OR

Profile Information

  • Gender
    Not Telling

Recent Profile Visitors

123 profile views

57buick's Achievements

Clownfish

Clownfish (2/15)

5

Reputation

  1. Looking for extension tube to turn my etss 2000 skimmer into a 2500 and also looking for the optional air muffler
  2. Here are pics of the shelving brackets as I was building the stand and the DJ power strip mounts for 4 power strips. Only 2 are showing mounted in the pic
  3. I want to sell or trade for a large calcium reactor setup to support a 500g system. I made this custom steel stand out of 1.5 steel tubing and had it poly coated which is the stuff they use on ocean going equipment so it will never rust. More rubbery feel than regular powder coat and stronger. The stand is 96 inches long 24 inches deep and 35 inches tall. The sump is a 120g and is 72x18x19 with two 7 inch sock filter holes. the water cascades up over the socks so there is no plumbing in your way to remove and replace the socks. I am only asking $1000 which is what the materials alone cost to build all this not counting labor. But I am somewhat negotiable. I should have got a pic with the plywood off, the center braces on top are off center a foot or so in case you have a center overflow it will not conflict with your plumbing. this would cost you $2000 to have this made so this is a steal. Its overbuilt thick wall steel tubing so it will last a couple lifetimes. My other stand I built identical to this I embedded strong magnets in cherry wood panels to stick to the stand and it looks really nice, I never got around to making panels for this stand but I can show you how easy it is. Would be happy to trade for a large calcium reactor setup to support a 400 to 600 gallon system. I live in Salem, OR 97302
  4. You can text me at Dave 541-912-5650 for it. I sent you a PM too
  5. New in the box, same electronic board for either an mp40 or MP60 only difference is the outside says mp60. Asking $40
  6. These came out of my 300 gallon tank, they are very heavy duty 1\2" thick towers are 29-3\4 tall 11-7\8 wide and 6 inches deep, they had 1.5 inch and 1 inch bulkheads plumbed behind them originally. Of course you could cut the heighth down to whatever you wanted. The tank was only 6 months old when I cut these out They include covers to keep snails etc out. $100 for the pair, these would cost close to $300 new
  7. So I setup a new 75g tank in our bedroom to look at while laying in bed and I'm loving it so far. Including the spotted puffer that has been fully acclimated to saltwater for 2 years that I got from a guy for free. Mainly doing the non reef safe stuff in this tank. There are some large leathers and random polyps that I don't care about but most fish don't eat leathers I think so should be fairly safe Picture files are 5 to 7mb so be patient loading them
  8. Unfortunately had a catastrophic failure because of a hole previous owner of tank drilled. It cracked around that rough hole. So I am looking for a replacement 8ft tank if anybody has any leads. Im exploring options of repairing or replacing
  9. I am looking for a replacement tank 96x24x30 if anybody has one or knows somebody who has one for sale. I want glass. Acrylic is just not worth it since I want it to look nice for years to come
  10. I am looking for a replacement tank 96x24x30 if anybody has one or knows somebody who has one for sale. I want glass. Acrylic is just not worth it since I want it to look nice for years to come
  11. the brackets for the power strips are just "L" brackets from the hardware store and drilled a couple holes in them. The backside of the stand vertical bars are just standard slotted shelving rods with the holes for shelf brackets to lock into
  12. Year I made the stand and then took it to Oregon Powder Coaters in Tangent, OR right outside Albany. Industrial place and they do very good work
  13. Im not sure of the manufacture. I bought it from a guy for only $800 and it was only used 6 months. It looks brand new so it was a steal
  14. So I just built this smaller steel stand to match the 300G one I built. Cherry wood panels with magnets embedded in them to stick to the stand. I've decided though I hate acrylic tanks so will be replacing this tank with a glass one in the next few weeks.
×
×
  • Create New...