reefnjunkie Posted May 31, 2016 Share Posted May 31, 2016 So I'm sure I'm the only idiot willing to post this mistake but if you don't back up/save your settings as you make adjustments or ever for that matter you better you idiot,mor you may end up like me (that's a scary thought). Granted you may not have 4 energy bars, and 4 add on modules and the other COUNTLESS profiles (24 if I recall) as I but not having them saved will be something I guarantee you will regret. I've been re-writtening all my commands for the last 5.5 hours and that's just enough were I can quite and deal with all the neat little tweaks tomorrow FML 1 Quote Link to comment Share on other sites More sharing options...
PowderBlue Posted May 31, 2016 Share Posted May 31, 2016 just bag it up, give it to me, and buy the new one but dang that sounds like a crap ton of work! Sent from my SM-G928V using Tapatalk Quote Link to comment Share on other sites More sharing options...
Mandinga Posted May 31, 2016 Share Posted May 31, 2016 I've had a blank blue screen apex for 7 months! When i fix that, i'll be sure to back it up Quote Link to comment Share on other sites More sharing options...
TheClark Posted May 31, 2016 Share Posted May 31, 2016 So I'm sure I'm the only idiot willing to post this mistake but if you don't back up/save your settings as you make adjustments or ever for that matter you better you idiot,mor you may end up like me (that's a scary thought). Granted you may not have 4 energy bars, and 4 add on modules and the other COUNTLESS profiles (24 if I recall) as I but not having them saved will be something I guarantee you will regret. I've been re-writtening all my commands for the last 5.5 hours and that's just enough were I can quite and deal with all the neat little tweaks tomorrow FML Great advice, it's the truth! That is a bummer though, I feel your pain. One nice thing going forward, you can do is get a backup from reeftronics in text format. This can be helpful if the backup cannot restore for some reason. For example, here is mine pulled from reeftronics. Here are a bunch of others: http://www.reeftronics.net/ Service is free and amazing. Apex Name: apex Firmware: 4.40_8G15 Listing generated: 05/31/2016 07:13:16 PROGRAM [ WP40_Lt ] ( base_Var1 ) Program Type: Advanced Display Icon: Up/Down Arrows Logging: Enabled Program: Fallback ON Set OFF Set Night If Sun 000/-360 Then Calm If Sun 360/000 Then Calm If Sun 015/-015 Then Wave2 If Outlet PTimerFlush = ON Then Lt_Flush If Outlet PTimerCalm = ON Then Calm If Outlet PTimerWave2 = ON Then Wave2 If Outlet PTimerWave3 = ON Then Wave3 If FeedA 000 Then OFF [ WP40_Rt ] ( base_Var2 ) Program Type: Advanced Display Icon: Left/Right Arrows Logging: Enabled Program: Fallback ON Set OFF Set Night If Sun 000/-360 Then Calm If Sun 360/000 Then Calm If Sun 015/-015 Then WaveFPulse If Outlet PTimerFlush = ON Then Rt_Flush If Outlet PTimerCalm = ON Then Calm If Outlet PTimerWave2 = ON Then Wave2 If Outlet PTimerWave3 = ON Then Wave3 If FeedA 000 Then OFF [ VarSpd3_I3 ] ( base_Var3 ) Program Type: Advanced Display Icon: Up/Down Arrows Logging: Disabled Program: Set WaveFPulse If Time 08:00 to 10:59 Then Calm If Time 11:00 to 14:00 Then WaveFPulse If Time 14:01 to 20:00 Then Calm If Time 20:01 to 07:59 Then Night If Outlet PTimerFlush = ON Then Lt_Flush If Outlet PTimerCalm = ON Then Calm If Outlet PTimerWave2 = ON Then Wave2 If FeedA 000 Then OFF [ VarSpd4_I4 ] ( base_Var4 ) Program Type: Light Display Icon: Left/Right Arrows Logging: Disabled Program: Fallback OFF OSC 005:00/005:00/005:00 Then ON If FeedA 005 Then OFF [ SndAlm_I6 ] ( base_Alarm ) Program Type: Advanced Display Icon: Sound B Logging: Enabled Program: Set OFF If Outlet UNUSED_WASLE = ON Then ON If Outlet PowerOut = ON Then ON If TempSU > 81.0 Then ON [ SndWrn_I7 ] ( base_Warn ) Program Type: Advanced Display Icon: Sound A Logging: Enabled Program: Set OFF If Outlet SW_LEAK_5 = ON Then ON [ EmailAlm_I5 ] ( base_email ) Program Type: Advanced Display Icon: Email Logging: Enabled Program: Set OFF If TempSU > 81.0 Then ON If TempOV > 81.0 Then ON If TempSU < 75.0 Then ON If TempOV < 75.0 Then ON If Outlet SW_SumpHi_2 = ON Then ON If Outlet SW_SUMPLO_6 = ON Then ON If Outlet SW_OvFHI_54N = ON Then ON If Outlet SW_SkimHi53 = ON Then ON If Outlet PowerOut = ON Then ON If Outlet SAL_LOW = ON Then ON If Outlet SAL_HIGH = ON Then ON If Outlet CR_PH_VLOW = ON Then ON If Outlet CR_PH_VVLOW = ON Then ON If Outlet CR_PH_VHIGH = ON Then ON If Outlet PH_VLOW = ON Then ON If Outlet SW_LEAK_5 = ON Then ON Defer 000:30 Then ON [ ReturnPump3 ] ( 3_1 ) Program Type: Advanced Display Icon: Spigot Logging: Enabled Program: Fallback ON Set ON If FeedA 000 Then OFF If Outlet SW_OvFHI_54N = ON Then OFF [ ATOSW_3_2 ] ( 3_2 ) Program Type: Advanced Display Icon: Spigot Logging: Enabled Program: If Outlet SW_ATOLO5152 = OFF Then OFF If Outlet DRAIN_PUMP = ON Then ON If Outlet SW_SumpHi_2 = ON Then OFF If FeedA 000 Then OFF If Power EB8_4 OFF 000 Then OFF If Outlet SAL_HIGH = ON Then OFF If Outlet SW_LEAK_5 = ON Then OFF Defer 001:00 Then ON [ AIRINJECT_3_ ] ( 3_3 ) Program Type: Advanced Display Icon: Up/Down Arrows Logging: Enabled Program: Fallback OFF Set OFF If Time 01:00 to 04:00 Then ON [ ATOFW_3_4 ] ( 3_4 ) Program Type: Advanced Display Icon: Up/Down Arrows Logging: Enabled Program: Fallback OFF Set OFF If Outlet SW_ATOLO5152 = ON Then ON If Outlet SW_ATOLO5152 = OFF Then OFF If Outlet SW_SumpHi_2 = ON Then OFF If FeedA 000 Then OFF If Outlet SAL_LOW = ON Then OFF If Power EB8_4 OFF 000 Then OFF If Outlet DRAIN_PUMP = ON Then OFF If Outlet ATOSW_3_2 = ON Then OFF Defer 000:10 Then ON [ UNUSED_3_5 ] ( 3_5 ) Program Type: Advanced Display Icon: Hourglass Logging: Disabled Program: Fallback OFF [ DRAIN_PUMP ] ( 3_6 ) Program Type: Advanced Display Icon: Spigot Logging: Enabled Program: Fallback OFF Set OFF If Time 07:42 to 07:43 Then ON If Time 15:35 to 15:36 Then ON [ KALK_STIR ] ( 3_7 ) Program Type: Advanced Display Icon: Light A Logging: Enabled Program: Fallback OFF Set OFF If Time 13:02 to 13:04 Then ON If Time 19:02 to 19:04 Then ON If Time 01:02 to 01:04 Then ON If Time 07:02 to 07:04 Then ON [ AlwaysOn3 ] ( 3_8 ) Program Type: Advanced Display Icon: Light A Logging: Enabled Program: Fallback ON Set ON If FeedA 000 Then OFF If Outlet PowerOut = ON Then OFF [ PowerOutApex ] ( Cntl_A1 ) Program Type: Advanced Display Icon: Light A Logging: Disabled Program: Set OFF Fallback OFF If Power Apex OFF 000 Then ON [ PowerOutEB3 ] ( Cntl_A2 ) Program Type: Advanced Display Icon: Light B Logging: Enabled Program: Set OFF Fallback OFF If Power EB8_3 OFF 000 Then ON [ PowerOutEB4 ] ( Cntl_A3 ) Program Type: Advanced Display Icon: Up/Down Arrows Logging: Enabled Program: Set OFF Fallback OFF If Power EB8_4 OFF 000 Then ON [ PowerOut ] ( Cntl_A4 ) Program Type: Advanced Display Icon: Up/Down Arrows Logging: Disabled Program: Fallback OFF Set OFF If Outlet PowerOutApex = ON Then ON If Outlet PowerOutEB4 = ON Then ON If Outlet PowerOutEB3 = ON Then ON [ SW_ATOLO5152 ] ( Cntl_B1 ) Program Type: Advanced Display Icon: Spigot Logging: Enabled Program: Fallback OFF Set OFF If Swx5_1 CLOSED Then ON If Swx5_1 OPEN Then OFF If Swx5_2 OPEN Then OFF [ SW_LEAK_5 ] ( Cntl_B2 ) Program Type: Advanced Display Icon: Spigot Logging: Enabled Program: Fallback OFF Set OFF If Sw5 CLOSED Then ON If Sw5 OPEN Then OFF Defer 000:30 Then ON [ SW_SumpHi_2 ] ( Cntl_B3 ) Program Type: Advanced Display Icon: Up/Down Arrows Logging: Enabled Program: If Sw2 CLOSED Then ON If Sw2 OPEN Then OFF If Outlet ReturnPump3 = OFF Then OFF Defer 002:00 Then ON [ UNUSED_WASLE ] ( Cntl_B4 ) Program Type: Advanced Display Icon: Up/Down Arrows Logging: Disabled Program: If Sw4 CLOSED Then ON If Sw4 OPEN Then OFF [ SW_OvFHI_54N ] ( Cntl_B5 ) Program Type: Advanced Display Icon: Spigot Logging: Enabled Program: If Swx5_4 CLOSED Then ON If Swx5_4 OPEN Then OFF Defer 000:10 Then ON [ SW_SkimHi53 ] ( Cntl_B6 ) Program Type: Advanced Display Icon: Thermometer Logging: Enabled Program: If Swx5_3 CLOSED Then OFF If Swx5_3 OPEN Then ON [ SW_RDI_H_56N ] ( Cntl_B7 ) Program Type: Advanced Display Icon: Left/Right Arrows Logging: Enabled Program: Fallback ON If Swx5_6 CLOSED Then OFF If Swx5_6 OPEN Then ON [ SW_RDI_L_55N ] ( Cntl_B8 ) Program Type: Advanced Display Icon: Left/Right Arrows Logging: Enabled Program: If Swx5_5 CLOSED Then ON If Swx5_5 OPEN Then OFF [ LightsFg4_1 ] ( 4_1 ) Program Type: Advanced Display Icon: Moon Logging: Enabled Program: Fallback ON Set OFF If Time 00:00 to 12:00 Then ON If Time 18:00 to 23:59 Then ON If TempSU > 82.0 Then OFF If Power EB8_4 OFF 000 Then OFF [ RODI4 ] ( 4_2 ) Program Type: Advanced Display Icon: Spigot Logging: Enabled Program: Fallback OFF If Outlet SW_RDI_L_55N = ON Then ON If Outlet SW_RDI_H_56N = ON Then OFF If Power EB8_4 OFF 000 Then OFF If Outlet SW_LEAK_5 = ON Then OFF Defer 000:10 Then ON [ DELAY_START ] ( 4_3 ) Program Type: Advanced Display Icon: Up/Down Arrows Logging: Enabled Program: Fallback ON Set ON If FeedA 000 Then OFF If FeedB 000 Then OFF If Outlet ReturnPump3 = OFF Then OFF If Power EB8_4 OFF 000 Then OFF Defer 002:00 Then ON [ HEATER_4_4 ] ( 4_4 ) Program Type: Advanced Display Icon: Up/Down Arrows Logging: Enabled Program: Fallback ON If TempSU < 77.7 Then ON If TempSU > 78.0 Then OFF If TempOV > 78.0 Then OFF [ CR_FEED_4_5 ] ( 4_5 ) Program Type: Advanced Display Icon: Thermometer Logging: Enabled Program: Fallback ON Set ON If Outlet CR_PH_VVLOW = ON Then OFF If Power EB8_4 OFF 000 Then OFF If Outlet ReturnPump3 = OFF Then OFF Defer 000:15 Then ON [ CR_SOL_4_6 ] ( 4_6 ) Program Type: Advanced Display Icon: Light A Logging: Enabled Program: Fallback ON Set ON If Outlet CR_PH_LOW = ON Then OFF If Outlet CR_PH_HIGH = ON Then ON If Outlet ReturnPump3 = OFF Then OFF [ FRAG_FEED_PU ] ( 4_7 ) Program Type: Advanced Display Icon: Light B Logging: Enabled Program: Fallback ON Set ON If FeedB 000 Then OFF If Outlet ReturnPump3 = OFF Then OFF If Power EB8_4 OFF 000 Then OFF [ KALK_FEED ] ( 4_8 ) Program Type: Advanced Display Icon: Moon Logging: Enabled Program: Fallback OFF Set OFF OSC 000:00/001:00/029:00 Then ON [ PTimerFlush ] ( Cntl_C1 ) Program Type: Advanced Display Icon: Light A Logging: Enabled Program: OSC 000:00/003:00/057:00 Then ON If Time 23:30 to 23:31 Then OFF If FeedA 000 Then OFF [ PTimerCalm ] ( Cntl_C2 ) Program Type: Advanced Display Icon: Light B Logging: Enabled Program: OSC 005:00/005:00/050:00 Then ON If Outlet PTimerWave2 = ON Then OFF If FeedA 000 Then OFF [ PTimerWave2 ] ( Cntl_C3 ) Program Type: Advanced Display Icon: Up/Down Arrows Logging: Enabled Program: OSC 010:00/040:00/010:00 Then ON If Time 23:30 to 23:31 Then OFF If FeedA 000 Then OFF [ PTimerWave3 ] ( Cntl_C4 ) Program Type: Advanced Display Icon: Up/Down Arrows Logging: Enabled Program: OSC 050:00/010:00/000:00 Then ON If Time 23:30 to 23:31 Then OFF If FeedA 000 Then OFF [ PumpTimer4 ] ( Cntl_C5 ) Program Type: Light Display Icon: Thermometer Logging: Enabled Program: Fallback OFF If TempSU < 78.0 Then ON If TempSU > 79.0 Then OFF [ CR_PH_LOW ] ( Cntl_C6 ) Program Type: Advanced Display Icon: Thermometer Logging: Enabled Program: Fallback OFF Set OFF If pHCRE < 6.65 Then ON [ CR_PH_HIGH ] ( Cntl_C7 ) Program Type: Advanced Display Icon: Left/Right Arrows Logging: Enabled Program: Fallback OFF Set OFF If pHCRE > 6.69 Then ON [ CR_PH_VLOW ] ( Cntl_C8 ) Program Type: Advanced Display Icon: Left/Right Arrows Logging: Enabled Program: Fallback OFF Set OFF If pHCRE < 6.45 Then ON Defer 003:00 Then ON [ CR_PH_VHIGH ] ( Cntl_C9 ) Program Type: Advanced Display Icon: Light A Logging: Enabled Program: Fallback OFF Set OFF If pHCRE > 7.05 Then ON Defer 001:00 Then ON [ PH_VLOW ] ( Cntl_C10 ) Program Type: Advanced Display Icon: Light B Logging: Enabled Program: Fallback OFF Set OFF If pHSump < 7.70 Then ON Defer 002:00 Then ON [ PH_VHIGH ] ( Cntl_C11 ) Program Type: Advanced Display Icon: Up/Down Arrows Logging: Enabled Program: Fallback OFF Set OFF If pHSump > 8.40 Then ON Defer 002:00 Then ON [ SW_SUMPLO_6 ] ( Cntl_C12 ) Program Type: Advanced Display Icon: Up/Down Arrows Logging: Enabled Program: Fallback OFF Set OFF If Sw6 CLOSED Then ON If Sw6 OPEN Then OFF [ LIGHTS_WHITE ] ( Cntl_C13 ) Program Type: Advanced Display Icon: Thermometer Logging: Disabled Program: Fallback OFF Set OFF If Sun 180/-180 Then ON If Power EB8_4 OFF 000 Then OFF [ SAL_LOW ] ( Cntl_C14 ) Program Type: Advanced Display Icon: Thermometer Logging: Enabled Program: Fallback OFF Set OFF If Condx5 < 03.1 Then ON Defer 004:00 Then ON [ SAL_HIGH ] ( Cntl_C15 ) Program Type: Advanced Display Icon: Left/Right Arrows Logging: Enabled Program: Fallback OFF Set OFF If Condx5 > 32.5 Then ON Defer 005:00 Then ON [ CR_PH_VVLOW ] ( Cntl_C16 ) Program Type: Advanced Display Icon: Left/Right Arrows Logging: Enabled Program: Fallback OFF Set OFF If pHCRE < 5.90 Then ON Defer 001:00 Then ON [ LW1_7_1 ] ( 7_1 ) Program Type: Advanced Display Icon: Light A Logging: Enabled Program: Fallback OFF Set OFF If Time 13:00 to 19:00 Then ON If Power EB8_4 OFF 000 Then OFF [ LUV_7_2 ] ( 7_2 ) Program Type: Advanced Display Icon: Up/Down Arrows Logging: Enabled Program: Fallback OFF Set OFF If Time 12:15 to 21:15 Then ON If Power EB8_4 OFF 000 Then OFF [ LT5_7_3 ] ( 7_3 ) Program Type: Advanced Display Icon: Up/Down Arrows Logging: Enabled Program: Fallback OFF Set OFF If Time 14:10 to 20:10 Then ON If Power EB8_4 OFF 000 Then OFF [ L4W_7_4 ] ( 7_4 ) Program Type: Advanced Display Icon: Up/Down Arrows Logging: Enabled Program: Fallback OFF Set OFF If Time 13:15 to 20:15 Then ON If Power EB8_4 OFF 000 Then OFF [ LB1_7_5 ] ( 7_5 ) Program Type: Advanced Display Icon: Thermometer Logging: Enabled Program: Fallback OFF Set OFF If Time 12:00 to 21:00 Then ON If Power EB8_4 OFF 000 Then OFF [ LB2_7_6 ] ( 7_6 ) Program Type: Advanced Display Icon: Thermometer Logging: Enabled Program: Fallback OFF Set OFF If Time 12:05 to 21:05 Then ON If Power EB8_4 OFF 000 Then OFF [ LB3_7_7 ] ( 7_7 ) Program Type: Advanced Display Icon: Left/Right Arrows Logging: Enabled Program: Fallback OFF Set OFF If Time 12:10 to 21:10 Then ON If Power EB8_4 OFF 000 Then OFF [ LB4_7_8 ] ( 7_8 ) Program Type: Advanced Display Icon: Left/Right Arrows Logging: Enabled Program: Fallback OFF Set OFF If Time 12:15 to 21:15 Then ON If Power EB8_4 OFF 000 Then OFF [ LW_FR ] ( 8_1 ) Program Type: Advanced Display Icon: Light A Logging: Enabled Program: Fallback OFF Set OFF If Time 08:00 to 10:00 Then ON If Time 20:00 to 22:00 Then ON If Power EB8_4 OFF 000 Then OFF [ LB_FR ] ( 8_2 ) Program Type: Advanced Display Icon: Light B Logging: Enabled Program: Fallback OFF Set OFF If Time 07:00 to 11:00 Then ON If Time 19:00 to 23:00 Then ON If Power EB8_4 OFF 000 Then OFF [ PUMPS_FR ] ( 8_3 ) Program Type: Advanced Display Icon: Up/Down Arrows Logging: Enabled Program: Fallback ON Set ON If FeedB 000 Then OFF [ HEATER_FR ] ( 8_4 ) Program Type: Advanced Display Icon: Up/Down Arrows Logging: Enabled Program: Fallback ON If TempSU < 77.7 Then ON If TempSU > 78.0 Then OFF If TempOV > 78.0 Then OFF [ SKIM_FR ] ( 8_5 ) Program Type: Advanced Display Icon: Spigot Logging: Enabled Program: Fallback ON Set ON If Outlet SW_SkimHi53 = ON Then OFF If FeedB 000 Then OFF If Power EB8_4 OFF 000 Then OFF [ T5_FR ] ( 8_6 ) Program Type: Advanced Display Icon: Light B Logging: Enabled Program: Fallback OFF Set OFF If Time 08:00 to 10:00 Then ON If Time 20:00 to 22:00 Then ON If Power EB8_4 OFF 000 Then OFF [ SWAB_FR ] ( 8_7 ) Program Type: Advanced Display Icon: Left/Right Arrows Logging: Disabled Program: Fallback OFF Set OFF OSC 000:00/003:00/237:00 Then ON [ Ozone_8_8 ] ( 8_8 ) Program Type: ORP Control Display Icon: Left/Right Arrows Logging: Disabled Program: Fallback OFF If ORP > 375 Then OFF If ORP < 360 Then ON PROFILES [ WaveFPulse ] ( PF1 ) Type: Pump Synchronize: Enable Divide By 10: Enable Initial Off Time: 0 On Time: 10 Off Time: 3 Minimum Intensity: 35 Maximum Intensity: 65 [ Wave2 ] ( PF2 ) Type: Pump Synchronize: Enable Divide By 10: Enable Initial Off Time: 0 On Time: 4 Off Time: 9 Minimum Intensity: 0 Maximum Intensity: 55 [ Lt_Flush ] ( PF3 ) Type: Pump Synchronize: Disable Divide By 10: Disable Initial Off Time: 0 On Time: 30 Off Time: 30 Minimum Intensity: 50 Maximum Intensity: 50 [ Rt_Flush ] ( PF4 ) Type: Pump Synchronize: Disable Divide By 10: Disable Initial Off Time: 30 On Time: 30 Off Time: 30 Minimum Intensity: 50 Maximum Intensity: 50 [ Calm ] ( PF5 ) Type: Ramp Ramp Time: 60 Start Intensity: 30 End Intensity: 30 [ Night ] ( PF6 ) Type: Pump Synchronize: Disable Divide By 10: Enable Initial Off Time: 0 On Time: 18 Off Time: 8 Minimum Intensity: 0 Maximum Intensity: 40 [ Wave3 ] ( PF7 ) Type: Pump Synchronize: Enable Divide By 10: Enable Initial Off Time: 0 On Time: 30 Off Time: 10 Minimum Intensity: 5 Maximum Intensity: 45 [ FullOn ] ( PF8 ) Type: Ramp Ramp Time: 1 Start Intensity: 100 End Intensity: 100 [ PF9 ] ( PF9 ) Type: Pump Synchronize: Disable Divide By 10: Disable Initial Off Time: 1 On Time: 1 Off Time: 1 Minimum Intensity: 0 Maximum Intensity: 100 [ PF10 ] ( PF10 ) Type: Pump Synchronize: Disable Divide By 10: Disable Initial Off Time: 1 On Time: 1 Off Time: 1 Minimum Intensity: 0 Maximum Intensity: 100 [ PF11 ] ( PF11 ) Type: Pump Synchronize: Disable Divide By 10: Disable Initial Off Time: 1 On Time: 1 Off Time: 1 Minimum Intensity: 0 Maximum Intensity: 100 [ PF12 ] ( PF12 ) Type: Pump Synchronize: Disable Divide By 10: Disable Initial Off Time: 1 On Time: 1 Off Time: 1 Minimum Intensity: 0 Maximum Intensity: 100 [ PF13 ] ( PF13 ) Type: Pump Synchronize: Disable Divide By 10: Disable Initial Off Time: 1 On Time: 1 Off Time: 1 Minimum Intensity: 0 Maximum Intensity: 100 [ PF14 ] ( PF14 ) Type: Pump Synchronize: Disable Divide By 10: Disable Initial Off Time: 1 On Time: 1 Off Time: 1 Minimum Intensity: 0 Maximum Intensity: 100 [ PF15 ] ( PF15 ) Type: Pump Synchronize: Disable Divide By 10: Disable Initial Off Time: 1 On Time: 1 Off Time: 1 Minimum Intensity: 0 Maximum Intensity: 100 [ PF16 ] ( PF16 ) Type: Pump Synchronize: Disable Divide By 10: Disable Initial Off Time: 1 On Time: 1 Off Time: 1 Minimum Intensity: 0 Maximum Intensity: 100 [ PF17 ] ( PF17 ) Type: Pump Synchronize: Disable Divide By 10: Disable Initial Off Time: 1 On Time: 1 Off Time: 1 Minimum Intensity: 0 Maximum Intensity: 100 [ PF18 ] ( PF18 ) Type: Pump Synchronize: Disable Divide By 10: Disable Initial Off Time: 1 On Time: 1 Off Time: 1 Minimum Intensity: 0 Maximum Intensity: 100 [ PF19 ] ( PF19 ) Type: Pump Synchronize: Disable Divide By 10: Disable Initial Off Time: 1 On Time: 1 Off Time: 1 Minimum Intensity: 0 Maximum Intensity: 100 [ PF20 ] ( PF20 ) Type: Pump Synchronize: Disable Divide By 10: Disable Initial Off Time: 1 On Time: 1 Off Time: 1 Minimum Intensity: 0 Maximum Intensity: 100 [ PF21 ] ( PF21 ) Type: Pump Synchronize: Disable Divide By 10: Disable Initial Off Time: 1 On Time: 1 Off Time: 1 Minimum Intensity: 0 Maximum Intensity: 100 [ PF22 ] ( PF22 ) Type: Pump Synchronize: Disable Divide By 10: Disable Initial Off Time: 1 On Time: 1 Off Time: 1 Minimum Intensity: 0 Maximum Intensity: 100 [ PF23 ] ( PF23 ) Type: Pump Synchronize: Disable Divide By 10: Disable Initial Off Time: 1 On Time: 1 Off Time: 1 Minimum Intensity: 0 Maximum Intensity: 100 [ PF24 ] ( PF24 ) Type: Pump Synchronize: Disable Divide By 10: Disable Initial Off Time: 1 On Time: 1 Off Time: 1 Minimum Intensity: 0 Maximum Intensity: 100 [ PF25 ] ( PF25 ) Type: Pump Synchronize: Disable Divide By 10: Disable Initial Off Time: 1 On Time: 1 Off Time: 1 Minimum Intensity: 0 Maximum Intensity: 100 [ PF26 ] ( PF26 ) Type: Pump Synchronize: Disable Divide By 10: Disable Initial Off Time: 1 On Time: 1 Off Time: 1 Minimum Intensity: 0 Maximum Intensity: 100 [ PF27 ] ( PF27 ) Type: Pump Synchronize: Disable Divide By 10: Disable Initial Off Time: 1 On Time: 1 Off Time: 1 Minimum Intensity: 0 Maximum Intensity: 100 [ PF28 ] ( PF28 ) Type: Pump Synchronize: Disable Divide By 10: Disable Initial Off Time: 1 On Time: 1 Off Time: 1 Minimum Intensity: 0 Maximum Intensity: 100 [ PF29 ] ( PF29 ) Type: Pump Synchronize: Disable Divide By 10: Disable Initial Off Time: 1 On Time: 1 Off Time: 1 Minimum Intensity: 0 Maximum Intensity: 100 [ PF30 ] ( PF30 ) Type: Pump Synchronize: Disable Divide By 10: Disable Initial Off Time: 1 On Time: 1 Off Time: 1 Minimum Intensity: 0 Maximum Intensity: 100 [ PF31 ] ( PF31 ) Type: Pump Synchronize: Disable Divide By 10: Disable Initial Off Time: 1 On Time: 1 Off Time: 1 Minimum Intensity: 0 Maximum Intensity: 100 [ PF32 ] ( PF32 ) Type: Pump Synchronize: Disable Divide By 10: Disable Initial Off Time: 1 On Time: 1 Off Time: 1 Minimum Intensity: 0 Maximum Intensity: 100 2 Quote Link to comment Share on other sites More sharing options...
reefnjunkie Posted May 31, 2016 Author Share Posted May 31, 2016 I guess it couls have been worse, i could have ramped devices as it looks like you might be doing. You have more commands than I- you are definitely using the APEX to its fullest LOL Ill look into the reeftronics, i dont how that works Thanks Jeremy Sent from my SM-G920P using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Exodus Posted May 31, 2016 Share Posted May 31, 2016 Good Reminder for those that haven't, I know I waited a bit longer than I should have to back up my settings (right before I swapped tanks) It's quick and easy to do! Quote Link to comment Share on other sites More sharing options...
reefnjunkie Posted May 31, 2016 Author Share Posted May 31, 2016 I was wondering if what i see in fusion should cause alarm one of my EB8 is running at 69 amps, but the good news is it doesn't take long before it drops to zero but then it jumps back to 20 40 60.....but again good news back to zero This actually gave me enough reason to go home between my appointments to see if my was on fire, the cord is melted or what Everything checked out okay I guess that's just a module to take off Fusion so I don't have to look at it How's that for a fix Love the hobby Sent from my SM-G920P using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
TheClark Posted June 1, 2016 Share Posted June 1, 2016 I would contact apex for that insanity they may suggest new firmware or hardware replacement!! Quote Link to comment Share on other sites More sharing options...
reefnjunkie Posted June 1, 2016 Author Share Posted June 1, 2016 I did a firmware update and ended up doing a full initialization and copied everything back by cut n paste- I didn't want to risk doing the upload- Another fun night but im solid now, nothing could posssibly happen, im thinking of going out of town to a remote area with no 4g or wireless just to temp my fate Bring it...... Sent from my SM-G920P using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
TheClark Posted June 1, 2016 Share Posted June 1, 2016 I did a firmware update and ended up doing a full initialization and copied everything back by cut n paste- I didn't want to risk doing the upload- Another fun night but im solid now, nothing could posssibly happen, im thinking of going out of town to a remote area with no 4g or wireless just to temp my fate Bring it...... Sent from my SM-G920P using Tapatalk it's good you are back, glad to hear it. Quote Link to comment Share on other sites More sharing options...
TheClark Posted June 1, 2016 Share Posted June 1, 2016 PS: I think your PM is full! PM question - Is our spare apex still circulating around the pdx area? I shudder at the thought of losing mine... Quote Link to comment Share on other sites More sharing options...
LadAShark Posted June 2, 2016 Share Posted June 2, 2016 nothing could posssibly happen Murphy's law... Quote Link to comment Share on other sites More sharing options...
reefnjunkie Posted June 2, 2016 Author Share Posted June 2, 2016 Hey Jeremy I assume my capacity for messages decreased as a non-paying member.... Are you part of the group that went in and purchased the backup base module I know it was Darryl Karen Frank Roy myself Micah , I have it Sent from my SM-G920P using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
reefnjunkie Posted June 2, 2016 Author Share Posted June 2, 2016 Sorry about that outside of you and dannic I had to list right Sent from my SM-G920P using Tapatalk Quote Link to comment Share on other sites More sharing options...
TheClark Posted June 2, 2016 Share Posted June 2, 2016 Thank you! Glad you have it, hope I never need it Quote Link to comment Share on other sites More sharing options...
reefnjunkie Posted June 2, 2016 Author Share Posted June 2, 2016 Its in use right now LOL I just got my RMA number for my 70 amp unit Sent from my SM-G920P using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.