Leaderboard

So it is looking like there will be a 9 spot buy in on each of these acans, at $20.00 each for 2+polyp frags. AND, to make things interesting, we plan on starting a grow out contest for those who get a chance to snag a frag of these bad boys.

No consultants do this all day... then just bill a client. I think I have a Clark Public Utilities on-call contract here somewhere...

calibration incoming... 1. it is not Plexiglas, it is Acrylic. Plexiglas is a name brand of acrylic, like kleenex. 2. There are two general kinds of acrylic. extruded and cast. Cast is much much much stronger and doesn't melt when you machine it. ALL aquariums are made from cast acrylic. At that height, you will need cast. 3. at 23" height you can totally get away with 3/8" acrylic. 1/2 inch will bow less, but either one is way structurally sufficient. If you are having a hack build it that is off the shelf solvents (not going to name names but local) then I would go 1/2. The cost savings is nominal at best. 4. While you may want a box, your box will have to be braced along the top or it will bow and I mean bow BIG TIME. 2' tall 1/2 will probably bow 3-4" without a brace across the top. I think that timeframes for a custom build are going to be in the 2 month range

What does it mean if I misread "stick head" in your title? 😃

Too funny! I think you have me confused with WA DOT! Sent from my iPhone using Tapatalk

Okay so we have... AlbertaReef for Acan A and B, Optimus Prime for Acan A and B, BigDan for Acan A and B, Duck Head for Acan A, Badxgillen for Acan A and B, ReefSoup for Acan B, Bear for Acan B, Coral reef Tankers for Acan A, Snappy for Acan A, Exodus for Acan A and B, Deuce for Acan B, Tandor69 for Acan B, Leaving 1 of Acan A and 0 frags of Acan B. If we get more bites I will relinquish one of the cuts I reserved so someone else can participate.

Willapa works for a public agency now; will probably take him three weeks to do a 30 minutes of work

$10!? Man, what a rip-off Sent from my SM-G965U using Tapatalk

If you need 40B and they are 50% off, they cost $50 instead of $40 previously with DPG sale. I’d assume this isn’t going to break the bank 😂

Calibration appreciated, and the clarification on Acrylic (vs plexi). Top rim bracing is understood/makes complete sense. (and expected) Timeframe, now that's a shocker. Good to get calibrated! Thank you

I believe the 40,55 and 75 are just 50% off. There was a time I had 3 75 gallons that I scored from the $1 gallon. Sent from my SM-G960U using Tapatalk

Some of the traded items!

Sale/trade wwc bounce Looking for eclectus,jawbreaker, candy crush red/green combinations. Otherwise $150 .

I started mapping out the floorplan on the deck where the new room will be. It looks like I should have plenty of room to work with.

Jim, I've got several frags of this green table that originally came from CNC. This is a picture of the colony that John has in his tank. He bought the colony from Jeff after I got a frag. It is one of the faster growers I've had. It's also the only coral I have seen that is brighter than a green slimer.

Stand is complete, Painting of stand and rusty lightbars is complete, and vinyl back splash is up on the wall. (same material I used as shelf liner under mixing station containers) It's nice to see the room coming back together. Used wall adhesive to attach Vinyl splash guard. Yes, right across lower 8" of the window. Light bars reattached to stand, floors cleaned up, and slid back into position. Oh the Glow. (mixing station in the back left corner)

Garret just got back into the states from a trip to the Caribbean and said that he had two awesome Acan colonies set aside for us. I will see if I can get out there tomorrow so I can get them cut up.

right now reef crystal salt on Amazon is on sale for $36.00. for 5 gallons bucket. 160 gallons