Jump to content
Higher Thinking

New Build Phase 1: Stand

Recommended Posts

 

I've mentioned it to a few of y'all, but I got a new tank in the works. Custom sump and tank are still a couple weeks away, but I got the stand today. So I figured I may as well show that thing off.

 

Stand was built by forum member Scott (@Spectra). He did an amazing job on it. It's 2" rolled steel. Welds and seams look immaculate. I went with a 40 inch height because I like to make life hard on myself as I reach around inside the tank

 

Seriously though, I really like the taller appearance and it'll make the tank sit at a better height for viewing. Stand is 97" x 37" (tank is 96x36 not including trim).

 

Tank will be 24" tall for a total of 360 gallons. It is being built by Custom Aquariums out of Wisconsin. Shout out to Jeff at CNC for helping see that order through.

 

Sump is being built by Crystal Reef Aquatics. It will be 60 x 22 x 16 for max capacity of 85 gallons. Probably operate with a third of that, of course.

 

I will create a thread for the tank and sump once they arrive, but for now here's some stand pictures. d14cd94b43b9f289ad1916651994d645.jpg2c9abe52b567bd59a78b60a90b91121a.jpg15f5eed1fb6cf427a4111cc2469b91d7.jpgf190223a7532cde6b046454d2d63d9fa.jpg

 

Sent from my SM-G975U using Tapatalk

 

 

 

 

  • Like 13

Share this post


Link to post
Share on other sites

My sump is across the living room in a closet so I don't think I'll be enclosing the stand. I'm going to maintain the open style. In fact, I have extra laminate that matches my floor and I'm going to place a board on the bottom of the stand and then place laminate over that. That way it will match seamlessly with the house flooring. The only thing seen under tank will be 4 drains and a return line that all go into the floor.

Sent from my SM-G975U using Tapatalk

  • Like 2

Share this post


Link to post
Share on other sites

Nice work Scott @spectra!  Now maybe you have some time for light hangers 😀

Like the idea of the open stand and higher sitting tank - preferable to tall stands myself despite being height challenged.

  • Like 1
  • Haha 1

Share this post


Link to post
Share on other sites

Oh I can't wait to see this tank!! Spectra's got some skills!

Sent from my BLU R1 HD using Tapatalk

  • Like 2

Share this post


Link to post
Share on other sites
38 minutes ago, CrabbyCrabs said:

That stand is slick. What thickness tube was used? Is it powder coated? Tig welded? 

Thanks! I believe it's quarter inch, not sure on weld method. @spectra would have to provide that answer. Yes, it is powder coated. 

  • Like 1

Share this post


Link to post
Share on other sites

When the stand for a project makes you salivate and want one for yourself, you know the build is going to be something special. Also, the open concept is brilliant. Looking forward to this build thread, f'sho!

  • Like 2

Share this post


Link to post
Share on other sites

That stand looks like the work of Spectra! I’m sure this has been a long thought out project. 

Epic build for sure !:clap:

  • Like 2

Share this post


Link to post
Share on other sites
Stand is looking awesome bud! Looking forward to the build. Dream tank material for sure. 
Thanks Jeff! I'll have to have you harass CA if we don't hear anything by the end of next week
Nice work Scott [mention=13132]spectra[/mention]!  Now maybe you have some time for light hangers 
Like the idea of the open stand and higher sitting tank - preferable to tall stands myself despite being height challenged.
Haha. I remember you mentioning those at our last meeting. I'll look forward to seeing them!
When the stand for a project makes you salivate and want one for yourself, you know the build is going to be something special. Also, the open concept is brilliant. Looking forward to this build thread, f'sho!
Thanks Sid, appreciate the comments!
That stand looks like the work of Spectra! I’m sure this has been a long thought out project. 
Epic build for sure !:clap:
"Long thought out," yes. "Well thought out?" Still yet to be determined.

Sent from my SM-G975U using Tapatalk

  • Haha 1

Share this post


Link to post
Share on other sites

Glad you like it!

 

On 6/2/2019 at 8:19 AM, CrabbyCrabs said:

That stand is slick. What thickness tube was used? Is it powder coated? Tig welded? 

Its all 2x2x.120 tubing except for the bottom its all 1x2 so he can put some ply and wood to bring it all flush.......powder coated yes and welding was just done with wire. Tig welding on the ends would take some serious filler rod.........

  • Like 3

Share this post


Link to post
Share on other sites

Looking good Andrew, keep posting updates! And Excellent looking work as usual Scott!

 

  • Like 1
  • Thanks 1

Share this post


Link to post
Share on other sites

Tell the truth Scott... its held together with JB weld. :)

Sent from my SM-G960U using Tapatalk

  • Like 1
  • Haha 2

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...