By marine depot
Check out these Marine Depot Controller Board installations!
Organize Your Equipment and Hide Your Cords with Marine Depot Controller Boards!
Check out these videos about Marine Depot Controller Boards: https://mdshop.us/controller-board-videos
Check out more Marine Depot Controller Boards installation photos: https://mdshop.us/controller-board-installations
Looking for a stand for a 40 gal breeder that looks like this so it will match my 180 gal. Must be black let me know what you have and your price please. My other option is to build one but I don't wanna put all the time into it if I can buy one for a little cheaper.
Hey everyone! I haven't posted on here since the site crash and the ensuing events. I am in the middle of an upgrade from a standard 90 gallon to a Red Sea Reefer 450 (thank you Jeff @Cuttle Fish and Corals). I met Holly @GilandFin when I went to pick it up, and she convinced me to do a build thread, which I will begin soon. Just not enough hours in the day lately.
I have purchased all new equipment for this build so I need to clear some things out before I am suddenly single. Everything is around a year old and still works as new. All equipment has been vinegar soaked and cleaned except the tank. It will need a rinse and a good coralline scraping. The stand is a DIY and needs a minimal wipe down of salt creep.
I honestly don't have a ton of time or energy to take pics of everything, but if there is something you want a pic of, let me know and I will try to accommodate the request. Keep in mind, all equipment has been cleaned so you will be getting a picture that looks like one would expect.
Here is the list so far, and more will be added as I go:
Two wp25s with dual controller: $75 - also comes with an extra you can use for parts like the cage, impeller, o-ring, etc.
Jebao dc-6000 return with controller: $65
Ocean Revive Arctic T247 (2): $80 each
JBJ ATO w/ two aqualifters for parts, as both need new diaphragms: $25 (this was bought from a member here last year and never used, so I cannot speak to the functionality of the JBJ, only what I was told).
90 gallon standard reef ready Marineland with DIY stand and 29 gallon DIY sump w/ acrylic baffles: $150 - $100 if you pick it up today, as the goodwill resulting from getting it out at home is well worth $50 to me .
There are a couple of scratches on the front glass but cannot be seen when filled (at least by me). The tank is old school and HEAVY so you will need a couple of guys to move it. I will do my best to help. Here is a link to the PNWMAS thread of my original build for pics:
BRS 48" screen frame kit w/ what should be enough 1/4" netting to complete the project: $25
Two Oddysea 4x 48" T5 fixtures with Oddysea bulbs, one with a brand new Icecap 660 ballast and original ballasts: $120 for both (the icecap is worth more than this alone). This was a failed attempt to overdrive T5s, but were never used because I couldn't get the fans to run off the icecap. But I am not an electrician, and I'm sure someone more knowledgeable than I can get it going just fine.
Eight unused 48" ATI T5 bulbs, I believe two of each - Coral+, Blue+, Purple+, and Actinic+: $15 each or $100 for all.
I also have an SCA 303 Skimmer that is currently being used in my 50g stock tank that I will be selling soon as well. The skimmer is about a year old, but I replaced the Atman pump in August due to a hermit somehow getting lodged in the impeller and frying the original pump.
I still have the original boxes for most things for sale due to my hoarding problem. Sorry about the wordiness... I write Corporate documents for a living and its kind of hard to turn it off
PM with any questions or to get my phone number for texting purposes (I hate talking on the phone).
I need to get a custom steel stand made.
42 by 36 and 30 high box, using 1x1 rectangular steel tubing.
It is for a 36 by 36 tank, so it needs an extra tube on top to support the edge of the tank (at 36").
I plan to have it powder-coated when it is done, so I need all welds ground smooth.
I PM'd pnkrcklives but haven't heard back from him.
Please let me know if you know anybody that can do this work accurately and for a decent price.