precision marine help?

[Krux]

looking for the nylon screws for a precision marine reactor, do you have these in stock, can you get them, or am i better off just finding them online somewhere? need a dozen, they look to be about 1/4" i can measure if that is important. it is for the cr622

[inkto]

I would think a trip to the hardware store would be easiest if you didn't already try that...and if Travis does'nt have them.

[lazerbeam]

home depot or lowes has them i have had to get them before
mike

[andy]

HD has a mediocre selection of nylon hardware. Parkrose Hardware has a much better selection, which is good because I need to buy some to fix the bloody Gen-X needlewheel pump I broke again. You get what you pay for...

[JManrow]

I have found True Value Hardware Stores to have many of the nylon fittings I have needed.

You can always check with Precision Marine http://www.precisionmarine.com/index.html

or call their Toll-Free number 888-825-6716

[Randy-S]

I would also recommend the phone call to pm they probley would send them out to you free.

[H20cooled]

The larger size screws are hard to find locally. I just order a whole bunch of the 10-32 1" screws which are usally the size that are used for acylic equipment. If you want a couple let me know. I should have them in a couple of days.

Rich

[H20cooled]

I have the screws now if you want a couple...

[Krux]

i got it taken care of, plumbing it in tomorrow. thanks for the offer!